From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
The camera daughter board can also be connected to 8-bit ov7725 sensors,
so in preparation for configurable option to choose depending on the
camera's connected separate out the ov5640 nodes in a dtsi file.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
[geert: describe a single camera in the .dtsi, include multiple times]
Signed-off-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
---
v4:
- Describe a single camera in the .dtsi file,
- Include the .dtsi multiple times,
.../boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts | 151 +++++++++---------
.../r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi | 30 ++++
2 files changed, 103 insertions(+), 78 deletions(-)
create mode 100644 arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
index 98c3fbd89fa6c5c7..00634eb58ce39da5 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -91,67 +91,12 @@ &hscif0 {
status = "okay";
};
-&i2c0 {
- ov5640@3c {
- compatible = "ovti,ov5640";
- reg = <0x3c>;
- clocks = <&mclk_cam1>;
- clock-names = "xclk";
-
- port {
- ov5640_0: endpoint {
- bus-width = <8>;
- data-shift = <2>;
- bus-type = <6>;
- pclk-sample = <1>;
- remote-endpoint = <&vin0ep>;
- };
- };
- };
-};
-
&i2c1 {
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
status = "okay";
clock-frequency = <400000>;
-
- ov5640@3c {
- compatible = "ovti,ov5640";
- reg = <0x3c>;
- clocks = <&mclk_cam2>;
- clock-names = "xclk";
-
- port {
- ov5640_1: endpoint {
- bus-width = <8>;
- data-shift = <2>;
- bus-type = <6>;
- pclk-sample = <1>;
- remote-endpoint = <&vin1ep>;
- };
- };
- };
-};
-
-&i2c2 {
- ov5640@3c {
- compatible = "ovti,ov5640";
- reg = <0x3c>;
- clocks = <&mclk_cam3>;
- clock-names = "xclk";
-
- port {
- ov5640_2: endpoint {
- bus-width = <8>;
- data-shift = <2>;
- bus-type = <6>;
- pclk-sample = <1>;
- remote-endpoint = <&vin2ep>;
- };
- };
- };
};
&i2c3 {
@@ -160,23 +105,6 @@ &i2c3 {
status = "okay";
clock-frequency = <400000>;
-
- ov5640@3c {
- compatible = "ovti,ov5640";
- reg = <0x3c>;
- clocks = <&mclk_cam4>;
- clock-names = "xclk";
-
- port {
- ov5640_3: endpoint {
- bus-width = <8>;
- data-shift = <2>;
- bus-type = <6>;
- pclk-sample = <1>;
- remote-endpoint = <&vin3ep>;
- };
- };
- };
};
&pfc {
@@ -267,6 +195,21 @@ &scifb1 {
cts-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
};
+/*
+ * Below configuration ties VINx endpoints to ov5640/ov7725 camera endpoints
+ *
+ * Uncomment the #include statements to change configuration
+ */
+
+/* 8bit CMOS Camera 1 (J13) */
+#define CAM_PARENT_I2C i2c0
+#define MCLK_CAM mclk_cam1
+#define CAM_EP cam0ep
+#define VIN_EP vin0ep
+#undef CAM_ENABLED
+#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+
+#ifdef CAM_ENABLED
&vin0 {
/*
* Set SW2 switch on the SOM to 'ON'
@@ -278,13 +221,28 @@ &vin0 {
port {
vin0ep: endpoint {
- remote-endpoint = <&ov5640_0>;
+ remote-endpoint = <&cam0ep>;
bus-width = <8>;
bus-type = <6>;
};
};
};
-
+#endif /* CAM_ENABLED */
+
+#undef CAM_PARENT_I2C
+#undef MCLK_CAM
+#undef CAM_EP
+#undef VIN_EP
+
+/* 8bit CMOS Camera 2 (J14) */
+#define CAM_PARENT_I2C i2c1
+#define MCLK_CAM mclk_cam2
+#define CAM_EP cam1ep
+#define VIN_EP vin1ep
+#undef CAM_ENABLED
+#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+
+#ifdef CAM_ENABLED
&vin1 {
/* Set SW1 switch on the SOM to 'ON' */
status = "okay";
@@ -293,13 +251,29 @@ &vin1 {
port {
vin1ep: endpoint {
- remote-endpoint = <&ov5640_1>;
+ remote-endpoint = <&cam1ep>;
bus-width = <8>;
bus-type = <6>;
};
};
};
+#endif /* CAM_ENABLED */
+
+#undef CAM_PARENT_I2C
+#undef MCLK_CAM
+#undef CAM_EP
+#undef VIN_EP
+
+/* 8bit CMOS Camera 3 (J12) */
+#define CAM_PARENT_I2C i2c2
+#define MCLK_CAM mclk_cam3
+#define CAM_EP cam2ep
+#define VIN_EP vin2ep
+#undef CAM_ENABLED
+#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+
+#ifdef CAM_ENABLED
&vin2 {
status = "okay";
pinctrl-0 = <&vin2_pins>;
@@ -307,14 +281,29 @@ &vin2 {
port {
vin2ep: endpoint {
- remote-endpoint = <&ov5640_2>;
+ remote-endpoint = <&cam2ep>;
bus-width = <8>;
data-shift = <8>;
bus-type = <6>;
};
};
};
-
+#endif /* CAM_ENABLED */
+
+#undef CAM_PARENT_I2C
+#undef MCLK_CAM
+#undef CAM_EP
+#undef VIN_EP
+
+/* 8bit CMOS Camera 4 (J11) */
+#define CAM_PARENT_I2C i2c3
+#define MCLK_CAM mclk_cam4
+#define CAM_EP cam3ep
+#define VIN_EP vin3ep
+#undef CAM_ENABLED
+#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+
+#ifdef CAM_ENABLED
&vin3 {
status = "okay";
pinctrl-0 = <&vin3_pins>;
@@ -322,9 +311,15 @@ &vin3 {
port {
vin3ep: endpoint {
- remote-endpoint = <&ov5640_3>;
+ remote-endpoint = <&cam3ep>;
bus-width = <8>;
bus-type = <6>;
};
};
};
+#endif /* CAM_ENABLED */
+
+#undef CAM_PARENT_I2C
+#undef MCLK_CAM
+#undef CAM_EP
+#undef VIN_EP
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
new file mode 100644
index 0000000000000000..408016620f5b1a04
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This include file ties a VIN interface with a single ov5640 sensor on
+ * the iWave-RZ/G1H Qseven board development platform connected with the
+ * camera daughter board.
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#define CAM_ENABLED 1
+
+&CAM_PARENT_I2C {
+ ov5640@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ clocks = <&MCLK_CAM>;
+ clock-names = "xclk";
+ status = "okay";
+
+ port {
+ CAM_EP: endpoint {
+ bus-width = <8>;
+ data-shift = <2>;
+ bus-type = <6>;
+ pclk-sample = <1>;
+ remote-endpoint = <&VIN_EP>;
+ };
+ };
+ };
+};
--
2.25.1
