[PATCH v3 2/2] ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add support for 8-bit ov7725 sensors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The 8-bit ov7725 sensors can also be connected to the camera daughter
board.

This patch creates a separate dtsi file for ov7725 sensors and is included
in r8a7742-iwg21d-q7-dbcm-ca.dts. The user can set VINx_SENSOR depending
on the cameras connected.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
---
 .../boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts    |   7 ++
 .../dts/r8a7742-iwg21d-q7-dbcm-ov7725.dtsi    | 112 ++++++++++++++++++
 2 files changed, 119 insertions(+)
 create mode 100644 arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725.dtsi

diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
index 1ab4f9771a34..915ff5fd437c 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -11,6 +11,7 @@
 
 #define SENSOR_NONE		1
 #define SENSOR_OV5640		2
+#define SENSOR_OV7725		3
 
 /* 8bit CMOS Camera 1 (J13) */
 #define CAM1_PARENT_I2C		i2c0
@@ -40,6 +41,11 @@
  * VIN2 interface and also the ov5640 node connected to it)
  *      #define VIN2_SENSOR		SENSOR_NONE
  *
+ * To tie VINx endpoints to ov7725_x endpoints set VINx_SENSOR to
+ * SENSOR_OV7725 for example if ov7725_3 is connected to the VIN3
+ * interface set the below (this disables the ov5640_3)
+ *      #define VIN3_SENSOR		SENSOR_OV7725
+ *
  */
 #define VIN0_SENSOR		SENSOR_OV5640
 #define VIN1_SENSOR		SENSOR_OV5640
@@ -47,6 +53,7 @@
 #define VIN3_SENSOR		SENSOR_OV5640
 
 #include "r8a7742-iwg21d-q7-dbcm-ov5640.dtsi"
+#include "r8a7742-iwg21d-q7-dbcm-ov7725.dtsi"
 
 #if (VIN0_SENSOR == SENSOR_NONE)
 #undef VIN0_REMOTE_EP
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725.dtsi
new file mode 100644
index 000000000000..054d0a7cc5ce
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725.dtsi
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This include file ties VIN interfaces with ov7725 sensors on
+ * iWave-RZ/G1H Qseven board development platform connected with
+ * camera daughter board.
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#if (VIN0_SENSOR == SENSOR_OV7725)
+#define OV7725_0_STATUS		"okay"
+#define OV7725_0_REMOTE_EP	&VIN0_EP
+#define VIN0_REMOTE_EP		&ov7725_0
+#else
+#define OV7725_0_STATUS		"disabled"
+#define OV7725_0_REMOTE_EP	0
+#endif
+
+#if (VIN1_SENSOR == SENSOR_OV7725)
+#define OV7725_1_STATUS		"okay"
+#define OV7725_1_REMOTE_EP	&VIN1_EP
+#define VIN1_REMOTE_EP		&ov7725_1
+#else
+#define OV7725_1_STATUS		"disabled"
+#define OV7725_1_REMOTE_EP	0
+#endif
+
+#if (VIN2_SENSOR == SENSOR_OV7725)
+#define OV7725_2_STATUS		"okay"
+#define OV7725_2_REMOTE_EP	&VIN2_EP
+#define VIN2_REMOTE_EP		&ov7725_2
+#else
+#define OV7725_2_STATUS		"disabled"
+#define OV7725_2_REMOTE_EP	0
+#endif
+
+#if (VIN3_SENSOR == SENSOR_OV7725)
+#define OV7725_3_STATUS		"okay"
+#define OV7725_3_REMOTE_EP	&VIN3_EP
+#define VIN3_REMOTE_EP		&ov7725_3
+#else
+#define OV7725_3_STATUS		"disabled"
+#define OV7725_3_REMOTE_EP	0
+#endif
+
+&CAM1_PARENT_I2C {
+	ov7725@21 {
+		compatible = "ovti,ov7725";
+		reg = <0x21>;
+		clocks = <&MCLK_CAM1>;
+		status = OV7725_0_STATUS;
+
+		port {
+			ov7725_0: endpoint {
+				bus-width = <8>;
+				bus-type = <6>;
+				remote-endpoint = <OV7725_0_REMOTE_EP>;
+			};
+		};
+	};
+};
+
+&CAM2_PARENT_I2C {
+	ov7725@21 {
+		compatible = "ovti,ov7725";
+		reg = <0x21>;
+		clocks = <&MCLK_CAM2>;
+		status = OV7725_1_STATUS;
+
+		port {
+			ov7725_1: endpoint {
+				bus-width = <8>;
+				bus-type = <6>;
+				remote-endpoint = <OV7725_1_REMOTE_EP>;
+			};
+		};
+	};
+};
+
+&CAM3_PARENT_I2C {
+	ov7725@21 {
+		compatible = "ovti,ov7725";
+		reg = <0x21>;
+		clocks = <&MCLK_CAM3>;
+		status = OV7725_2_STATUS;
+
+		port {
+			ov7725_2: endpoint {
+				bus-width = <8>;
+				bus-type = <6>;
+				remote-endpoint = <OV7725_2_REMOTE_EP>;
+			};
+		};
+	};
+};
+
+&CAM4_PARENT_I2C {
+	ov7725@21 {
+		compatible = "ovti,ov7725";
+		reg = <0x21>;
+		clocks = <&MCLK_CAM4>;
+		status = OV7725_3_STATUS;
+
+		port {
+			ov7725_3: endpoint {
+				bus-width = <8>;
+				bus-type = <6>;
+				remote-endpoint = <OV7725_3_REMOTE_EP>;
+			};
+		};
+	};
+};
-- 
2.17.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux