From: Wolfram Sang <wsa@xxxxxxxxxx> Newer SDHI variants can 'wait while busy' longer than the generic TMIO. Provide a hook to get the maximum cycle count to wait for. If the hook is not populated, fall back to a generic version which works well with all older TMIO/SDHI variants. Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> --- drivers/mmc/host/tmio_mmc.h | 1 + drivers/mmc/host/tmio_mmc_core.c | 17 ++++++++++++----- 2 files changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index 819198af17f4..f60559bc413a 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -181,6 +181,7 @@ struct tmio_mmc_host { void (*reset)(struct tmio_mmc_host *host); bool (*check_retune)(struct tmio_mmc_host *host); void (*fixup_request)(struct tmio_mmc_host *host, struct mmc_request *mrq); + unsigned int (*get_timeout_cycles)(struct tmio_mmc_host *host); void (*prepare_hs400_tuning)(struct tmio_mmc_host *host); void (*hs400_downgrade)(struct tmio_mmc_host *host); diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c index da9a6243f146..f0711f4c1e5b 100644 --- a/drivers/mmc/host/tmio_mmc_core.c +++ b/drivers/mmc/host/tmio_mmc_core.c @@ -887,16 +887,20 @@ static void tmio_mmc_set_bus_width(struct tmio_mmc_host *host, sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, reg); } -static void tmio_mmc_max_busy_timeout(struct tmio_mmc_host *host) +static unsigned int tmio_mmc_get_timeout_cycles(struct tmio_mmc_host *host) { u16 val = sd_ctrl_read16(host, CTL_SD_MEM_CARD_OPT); - unsigned int clk_rate = host->mmc->actual_clock ?: host->mmc->f_max; - unsigned int cycles; val = (val & CARD_OPT_TOP_MASK) >> CARD_OPT_TOP_SHIFT; - cycles = 1 << (13 + val); + return 1 << (13 + val); +} + +static void tmio_mmc_max_busy_timeout(struct tmio_mmc_host *host) +{ + unsigned int clk_rate = host->mmc->actual_clock ?: host->mmc->f_max; - host->mmc->max_busy_timeout = cycles / (clk_rate / MSEC_PER_SEC); + host->mmc->max_busy_timeout = host->get_timeout_cycles(host) / + (clk_rate / MSEC_PER_SEC); } /* Set MMC clock / power. @@ -1116,6 +1120,9 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host) if (!(pdata->flags & TMIO_MMC_HAS_IDLE_WAIT)) _host->write16_hook = NULL; + if (pdata->flags & TMIO_MMC_USE_BUSY_TIMEOUT && !_host->get_timeout_cycles) + _host->get_timeout_cycles = tmio_mmc_get_timeout_cycles; + _host->set_pwr = pdata->set_pwr; ret = tmio_mmc_init_ocr(_host); -- 2.28.0