Fix GPIO enable/disable operations which wrongly read the 0x0f register
to obtain the current mask of the enabled lines instead of using
the correct 0x0e register.
Also fix access to bit 0 of the register which is marked as reserved.
Fixes: 34009bffc1c6 ("media: i2c: Add RDACM20 driver")
Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
---
drivers/media/i2c/max9271.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/media/i2c/max9271.c b/drivers/media/i2c/max9271.c
index 0f6f7a092a46..c247db569bab 100644
--- a/drivers/media/i2c/max9271.c
+++ b/drivers/media/i2c/max9271.c
@@ -223,12 +223,12 @@ int max9271_enable_gpios(struct max9271_device *dev, u8 gpio_mask)
{
int ret;
- ret = max9271_read(dev, 0x0f);
+ ret = max9271_read(dev, 0x0e);
if (ret < 0)
return 0;
/* BIT(0) reserved: GPO is always enabled. */
- ret |= gpio_mask | BIT(0);
+ ret |= (gpio_mask & ~BIT(0));
ret = max9271_write(dev, 0x0e, ret);
if (ret < 0) {
dev_err(&dev->client->dev, "Failed to enable gpio (%d)\n", ret);
@@ -245,12 +245,12 @@ int max9271_disable_gpios(struct max9271_device *dev, u8 gpio_mask)
{
int ret;
- ret = max9271_read(dev, 0x0f);
+ ret = max9271_read(dev, 0x0e);
if (ret < 0)
return 0;
/* BIT(0) reserved: GPO cannot be disabled */
- ret &= (~gpio_mask | BIT(0));
+ ret &= ~(gpio_mask | BIT(0));
ret = max9271_write(dev, 0x0e, ret);
if (ret < 0) {
dev_err(&dev->client->dev, "Failed to disable gpio (%d)\n", ret);
--
2.29.1
