[PATCH 3/7] ARM: shmobile: r8a7779: Use ioremap() to map SMP registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Replace using the legacy IOMEM() macro to map the ARM Reset Vector
Address Register (AVECR) by ioremap().

Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
 arch/arm/mach-shmobile/smp-r8a7779.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 0ed73b650c141e58..f6713886ee16b279 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -20,8 +20,10 @@
 #include "common.h"
 #include "r8a7779.h"
 
-#define AVECR IOMEM(0xfe700040)
-#define R8A7779_SCU_BASE 0xf0000000
+#define HPBREG_BASE		0xfe700000
+#define AVECR			0x0040	/* ARM Reset Vector Address Register */
+
+#define R8A7779_SCU_BASE	0xf0000000
 
 static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
@@ -36,11 +38,15 @@ static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
 {
+	void __iomem *base = ioremap(HPBREG_BASE, 0x1000);
+
 	/* Map the reset vector (in headsmp-scu.S, headsmp.S) */
-	__raw_writel(__pa(shmobile_boot_vector), AVECR);
+	__raw_writel(__pa(shmobile_boot_vector), base + AVECR);
 
 	/* setup r8a7779 specific SCU bits */
 	shmobile_smp_scu_prepare_cpus(R8A7779_SCU_BASE, max_cpus);
+
+	iounmap(base);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-- 
2.25.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux