[PATCH 7/8] pinctrl: renesas: r8a7778: Use common R-Car bias handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently, the rcar_pinmux_[gs]et_bias() helpers handle only SoCs that
have separate LSI Pin Pull-Enable (PUEN) and Pull-Up/Down Control (PUD)
registers, like R-Car Gen3 and RZ/G2.  Update the function to handle
SoCs that have only LSI Pin Pull-Up Control Register (PUPR), like R-Car
Gen1/Gen2 and RZ/G1.

Reduce code duplication by converting the R-Car M1A pin control driver
to use the common handler.

Note that this changes behavior in case the (invalid!) option
"bias-pull-down" is used in an R-Car M1A DTS: before, it was ignored
silently; after this change, it is considered the same as
"bias-pull-up".

Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
 drivers/pinctrl/renesas/pfc-r8a7778.c | 37 ++-------------------------
 drivers/pinctrl/renesas/pinctrl.c     | 13 ++++++----
 2 files changed, 10 insertions(+), 40 deletions(-)

diff --git a/drivers/pinctrl/renesas/pfc-r8a7778.c b/drivers/pinctrl/renesas/pfc-r8a7778.c
index debf0c9a281cee31..75f52b1798c3c5c9 100644
--- a/drivers/pinctrl/renesas/pfc-r8a7778.c
+++ b/drivers/pinctrl/renesas/pfc-r8a7778.c
@@ -3116,42 +3116,9 @@ static const struct pinmux_bias_reg pinmux_bias_regs[] = {
 	{ /* sentinel */ },
 };
 
-static unsigned int r8a7778_pinmux_get_bias(struct sh_pfc *pfc,
-					    unsigned int pin)
-{
-	const struct pinmux_bias_reg *reg;
-	unsigned int bit;
-
-	reg = sh_pfc_pin_to_bias_reg(pfc, pin, &bit);
-	if (!reg)
-		return PIN_CONFIG_BIAS_DISABLE;
-
-	if (sh_pfc_read(pfc, reg->puen) & BIT(bit))
-		return PIN_CONFIG_BIAS_PULL_UP;
-	else
-		return PIN_CONFIG_BIAS_DISABLE;
-}
-
-static void r8a7778_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin,
-				   unsigned int bias)
-{
-	const struct pinmux_bias_reg *reg;
-	unsigned int bit;
-	u32 value;
-
-	reg = sh_pfc_pin_to_bias_reg(pfc, pin, &bit);
-	if (!reg)
-		return;
-
-	value = sh_pfc_read(pfc, reg->puen) & ~BIT(bit);
-	if (bias == PIN_CONFIG_BIAS_PULL_UP)
-		value |= BIT(bit);
-	sh_pfc_write(pfc, reg->puen, value);
-}
-
 static const struct sh_pfc_soc_operations r8a7778_pfc_ops = {
-	.get_bias = r8a7778_pinmux_get_bias,
-	.set_bias = r8a7778_pinmux_set_bias,
+	.get_bias = rcar_pinmux_get_bias,
+	.set_bias = rcar_pinmux_set_bias,
 };
 
 const struct sh_pfc_soc_info r8a7778_pinmux_info = {
diff --git a/drivers/pinctrl/renesas/pinctrl.c b/drivers/pinctrl/renesas/pinctrl.c
index 4a030600f4fd0dd0..d5c798e98c18abee 100644
--- a/drivers/pinctrl/renesas/pinctrl.c
+++ b/drivers/pinctrl/renesas/pinctrl.c
@@ -835,7 +835,7 @@ unsigned int rcar_pinmux_get_bias(struct sh_pfc *pfc, unsigned int pin)
 
 	if (!(sh_pfc_read(pfc, reg->puen) & BIT(bit)))
 		return PIN_CONFIG_BIAS_DISABLE;
-	else if (sh_pfc_read(pfc, reg->pud) & BIT(bit))
+	else if (!reg->pud || (sh_pfc_read(pfc, reg->pud) & BIT(bit)))
 		return PIN_CONFIG_BIAS_PULL_UP;
 	else
 		return PIN_CONFIG_BIAS_PULL_DOWN;
@@ -856,10 +856,13 @@ void rcar_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin,
 	if (bias != PIN_CONFIG_BIAS_DISABLE)
 		enable |= BIT(bit);
 
-	updown = sh_pfc_read(pfc, reg->pud) & ~BIT(bit);
-	if (bias == PIN_CONFIG_BIAS_PULL_UP)
-		updown |= BIT(bit);
+	if (reg->pud) {
+		updown = sh_pfc_read(pfc, reg->pud) & ~BIT(bit);
+		if (bias == PIN_CONFIG_BIAS_PULL_UP)
+			updown |= BIT(bit);
+
+		sh_pfc_write(pfc, reg->pud, updown);
+	}
 
-	sh_pfc_write(pfc, reg->pud, updown);
 	sh_pfc_write(pfc, reg->puen, enable);
 }
-- 
2.25.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux