On 16. 09. 20 17:57, Krzysztof Kozlowski wrote:
> The convention for node names is to use hyphens, not underscores.
> dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
> index 4f801721564f..f1255f635dfd 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
> @@ -203,25 +203,25 @@
> gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3",
> "PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B",
> "", "", "", "", "", "", "", "", "";
> - gtr-sel0 {
> + gtr-sel0-hog {
> gpio-hog;
> gpios = <0 0>;
> output-low; /* PCIE = 0, DP = 1 */
> line-name = "sel0";
> };
> - gtr-sel1 {
> + gtr-sel1-hog {
> gpio-hog;
> gpios = <1 0>;
> output-high; /* PCIE = 0, DP = 1 */
> line-name = "sel1";
> };
> - gtr-sel2 {
> + gtr-sel2-hog {
> gpio-hog;
> gpios = <2 0>;
> output-high; /* PCIE = 0, USB0 = 1 */
> line-name = "sel2";
> };
> - gtr-sel3 {
> + gtr-sel3-hog {
> gpio-hog;
> gpios = <3 0>;
> output-high; /* PCIE = 0, SATA = 1 */
>
Tony picked up some patches from this series that's why applied this one
to my tree.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
