Hi Biju, On Thu, Sep 24, 2020 at 10:05 AM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote: > As per the iWave RZ/G1M schematic, the signal LVDS_PPEN controls supply > voltage for touch panel, LVDS receiver and RGB LCD panel. Add regulator > for these device nodes and remove powerdown-gpios property from > lvds-receiver node as it results in touch controller driver probe failure. > > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > --- > v4->v5 : Restored Laurent's Rb tag, since it is minor change, renaming vcc-supply to power-supply > > v3->v4 : Incorporated Laurent's review comments(https://patchwork.kernel.org/patch/11707887/) > Added Laurent's Reviewed-by tag > v2->v3 : Added the missing part from the patch. removal of powerdown-gpios property. > v1->v2 : Add regulator in touch panel, LVDS receiver and RGB LCD panel device nodes > (Ref: https://patchwork.kernel.org/patch/11707559/) > v1 : https://patchwork.kernel.org/patch/11705819/ Thanks for the update! As the prerequisites are now in next, I can queue this in renesas-devel for v5.11 after v5.10-rc1 has been released. Or do you think this should be fast-tracked as a fix for v5.10 or v5.9? I.e. is this an actual regression, or just something that never worked before? Note that v1 had a Fixes tag, which was lost in subsequent versions. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
