The following changes since commit 9123e3a74ec7b934a4a099e98af6a61c2f80bbf5:
Linux 5.9-rc1 (2020-08-16 13:04:57 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git tags/renesas-arm-dt-for-v5.10-tag1
for you to fetch changes up to e9f0fb53ac88c1ccf3728b47c687838b6054f481:
arm64: dts: renesas: Add HiHope RZ/G2H board with idk-1110wr display (2020-09-04 09:54:39 +0200)
----------------------------------------------------------------
Renesas ARM DT updates for v5.10
- Increase support for the RZ/G2H SoC on the HopeRun HiHope RZ/G2H
board, and its display panel expansion board,
- Increase support for the RZ/G1H SoC on the iWave RainboW SoM (G21M)
and Qseven board (G21D),
- SATA support for the HopeRun HiHope RZ/G2N board,
- PCIe endpoint support for the RZ/G2M, RZ/G2E, and RZ/G2H SoCs,
- Audio support for the R-Car M3-W+ SoC.
- Minor fixes and improvements.
----------------------------------------------------------------
Biju Das (2):
ARM: dts: iwg22d-sodimm: Fix dt nodes sorting
arm64: dts: renesas: r8a774e1-hihope-rzg2h: Enable HS400 mode
Kuninori Morimoto (1):
arm64: dts: renesas: r8a77961: Enable Sound / Audio-DMAC
Lad Prabhakar (28):
arm64: dts: renesas: r8a774e1: Add PCIe device nodes
arm64: dts: renesas: r8a774e1: Add SATA controller node
arm64: dts: renesas: r8a774e1: Add USB2.0 phy and host (EHCI/OHCI) device nodes
arm64: dts: renesas: r8a774e1: Add USB3.0 device nodes
arm64: dts: renesas: r8a774e1: Add USB-DMAC and HSUSB device nodes
arm64: dts: renesas: r8a774e1: Add audio support
arm64: dts: renesas: r8a774e1: Add VIN and CSI-2 nodes
ARM: dts: r8a7742-iwg21d-q7: Enable HSUSB, USB2.0 and xHCI
ARM: dts: r8a7742-iwg21d-q7: Enable cmt0
ARM: dts: r8a7742: Add PWM SoC support
ARM: dts: r8a7742: Add TPU support
ARM: dts: r8a7742: Add DU support
ARM: dts: r8a7742: Add LVDS support
arm64: dts: renesas: r8a774b1-hihope-rzg2n-ex: Enable sata
ARM: dts: r8a7742: Add PCIe Controller device node
arm64: dts: renesas: r8a774e1-hihope-rzg2h: Setup DU clocks
ARM: dts: r8a7742: Add QSPI support
arm64: dts: renesas: r8a774a1: Add PCIe EP nodes
arm64: dts: renesas: r8a774b1: Add PCIe EP nodes
arm64: dts: renesas: r8a774c0: Add PCIe EP node
ARM: dts: r8a7742: Add CAN support
ARM: dts: r8a7742-iwg21m: Sort the nodes alphabetically
ARM: dts: r8a7742-iwg21m: Add RTC support
ARM: dts: r8a7742-iwg21m: Add SPI NOR support
ARM: dts: r8a7742: Add IPMMU DT nodes
ARM: dts: r8a7742-iwg21d-q7: Enable PCIe Controller
arm64: dts: renesas: r8a774e1: Add cpuidle support for CA5x cores
arm64: dts: renesas: Add HiHope RZ/G2H board with idk-1110wr display
Marian-Cristian Rotariu (7):
arm64: dts: renesas: r8a774e1: Add FCPF and FCPV instances
arm64: dts: renesas: r8a774e1: Add VSP instances
arm64: dts: renesas: r8a774e1: Populate DU device node
arm64: dts: renesas: r8a774e1: Populate HDMI encoder node
arm64: dts: renesas: r8a774e1: Add LVDS device node
arm64: dts: renesas: r8a774e1: Add PWM device nodes
arm64: dts: renesas: r8a774e1: Add FDP1 device nodes
Yoshihiro Shimoda (1):
arm64: dts: renesas: ulcb: add full-pwr-cycle-in-suspend into eMMC nodes
arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 58 +
arch/arm/boot/dts/r8a7742-iwg21m.dtsi | 79 +-
arch/arm/boot/dts/r8a7742.dtsi | 303 +++++
arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 112 +-
arch/arm64/boot/dts/renesas/Makefile | 1 +
arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 38 +
.../boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts | 5 +
arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 38 +
arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 19 +
.../r8a774e1-hihope-rzg2h-ex-idk-1110wr.dts | 15 +
.../boot/dts/renesas/r8a774e1-hihope-rzg2h.dts | 15 +
arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 1294 +++++++++++++++++++-
arch/arm64/boot/dts/renesas/r8a77961.dtsi | 483 +++++++-
arch/arm64/boot/dts/renesas/ulcb.dtsi | 1 +
14 files changed, 2367 insertions(+), 94 deletions(-)
create mode 100644 arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-idk-1110wr.dts
