[PATCH v4 4/4] pinctrl: sh-pfc: tidy up driver description title

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>

This patch sorts each driver by description title alphabetical order.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
 drivers/pinctrl/sh-pfc/Kconfig | 121 +++++++++++++++++----------------
 1 file changed, 62 insertions(+), 59 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/Kconfig b/drivers/pinctrl/sh-pfc/Kconfig
index c27861fa557d..5c2a8916e439 100644
--- a/drivers/pinctrl/sh-pfc/Kconfig
+++ b/drivers/pinctrl/sh-pfc/Kconfig
@@ -77,16 +77,6 @@ config PINCTRL_RZA2
 	help
 	  This selects GPIO and pinctrl driver for Renesas RZ/A2 platforms.
 
-config PINCTRL_RZN1
-	bool "pin control support for RZ/N1"
-	depends on OF
-	depends on ARCH_RZN1 || COMPILE_TEST
-	select GENERIC_PINCTRL_GROUPS
-	select GENERIC_PINMUX_FUNCTIONS
-	select GENERIC_PINCONF
-	help
-	  This selects pinctrl driver for Renesas RZ/N1 devices.
-
 config PINCTRL_SH_PFC_GPIO
 	select GPIOLIB
 	bool
@@ -102,13 +92,13 @@ config PINCTRL_SH_FUNC_GPIO
 config PINCTRL_PFC_EMEV2
 	bool "pin control support for Emma Mobile EV2" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A73A4
-	bool "pin control support for R-Mobile APE6" if COMPILE_TEST
-	select PINCTRL_SH_PFC_GPIO
 
-config PINCTRL_PFC_R8A7740
-	bool "pin control support for R-Mobile A1" if COMPILE_TEST
-	select PINCTRL_SH_PFC_GPIO
+
+config PINCTRL_PFC_R8A77470
+	bool "pin control support for RZ/G1C" if COMPILE_TEST
+
+config PINCTRL_PFC_R8A7745
+	bool "pin control support for RZ/G1E" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A7742
 	bool "pin control support for RZ/G1H" if COMPILE_TEST
@@ -119,11 +109,11 @@ config PINCTRL_PFC_R8A7743
 config PINCTRL_PFC_R8A7744
 	bool "pin control support for RZ/G1N" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A7745
-	bool "pin control support for RZ/G1E" if COMPILE_TEST
+config PINCTRL_PFC_R8A774C0
+	bool "pin control support for RZ/G2E" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A77470
-	bool "pin control support for RZ/G1C" if COMPILE_TEST
+config PINCTRL_PFC_R8A774E1
+	bool "pin control support for RZ/G2H" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A774A1
 	bool "pin control support for RZ/G2M" if COMPILE_TEST
@@ -131,14 +121,25 @@ config PINCTRL_PFC_R8A774A1
 config PINCTRL_PFC_R8A774B1
 	bool "pin control support for RZ/G2N" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A774C0
-	bool "pin control support for RZ/G2E" if COMPILE_TEST
+config PINCTRL_RZN1
+	bool "pin control support for RZ/N1"
+	depends on OF
+	depends on ARCH_RZN1 || COMPILE_TEST
+	select GENERIC_PINCTRL_GROUPS
+	select GENERIC_PINMUX_FUNCTIONS
+	select GENERIC_PINCONF
+	help
+	  This selects pinctrl driver for Renesas RZ/N1 devices.
 
-config PINCTRL_PFC_R8A774E1
-	bool "pin control support for RZ/G2H" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A7778
-	bool "pin control support for R-Car M1A" if COMPILE_TEST
+config PINCTRL_PFC_R8A77995
+	bool "pin control support for R-Car D3" if COMPILE_TEST
+
+config PINCTRL_PFC_R8A7794
+	bool "pin control support for R-Car E2" if COMPILE_TEST
+
+config PINCTRL_PFC_R8A77990
+	bool "pin control support for R-Car E3" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A7779
 	bool "pin control support for R-Car H1" if COMPILE_TEST
@@ -146,23 +147,23 @@ config PINCTRL_PFC_R8A7779
 config PINCTRL_PFC_R8A7790
 	bool "pin control support for R-Car H2" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A7791
-	bool "pin control support for R-Car M2-W" if COMPILE_TEST
+config PINCTRL_PFC_R8A77950
+	bool "pin control support for R-Car H3 ES1.x" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A7792
-	bool "pin control support for R-Car V2H" if COMPILE_TEST
+config PINCTRL_PFC_R8A77951
+	bool "pin control support for R-Car H3 ES2.0+" if COMPILE_TEST
+
+config PINCTRL_PFC_R8A7778
+	bool "pin control support for R-Car M1A" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A7793
 	bool "pin control support for R-Car M2-N" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A7794
-	bool "pin control support for R-Car E2" if COMPILE_TEST
-
-config PINCTRL_PFC_R8A77950
-	bool "pin control support for R-Car H3 ES1.x" if COMPILE_TEST
+config PINCTRL_PFC_R8A7791
+	bool "pin control support for R-Car M2-W" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A77951
-	bool "pin control support for R-Car H3 ES2.0+" if COMPILE_TEST
+config PINCTRL_PFC_R8A77965
+	bool "pin control support for R-Car M3-N" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A77960
 	bool "pin control support for R-Car M3-W" if COMPILE_TEST
@@ -170,20 +171,22 @@ config PINCTRL_PFC_R8A77960
 config PINCTRL_PFC_R8A77961
 	bool "pin control support for R-Car M3-W+" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A77965
-	bool "pin control support for R-Car M3-N" if COMPILE_TEST
-
-config PINCTRL_PFC_R8A77970
-	bool "pin control support for R-Car V3M" if COMPILE_TEST
+config PINCTRL_PFC_R8A7792
+	bool "pin control support for R-Car V2H" if COMPILE_TEST
 
 config PINCTRL_PFC_R8A77980
 	bool "pin control support for R-Car V3H" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A77990
-	bool "pin control support for R-Car E3" if COMPILE_TEST
+config PINCTRL_PFC_R8A77970
+	bool "pin control support for R-Car V3M" if COMPILE_TEST
 
-config PINCTRL_PFC_R8A77995
-	bool "pin control support for R-Car D3" if COMPILE_TEST
+config PINCTRL_PFC_R8A7740
+	bool "pin control support for R-Mobile A1" if COMPILE_TEST
+	select PINCTRL_SH_PFC_GPIO
+
+config PINCTRL_PFC_R8A73A4
+	bool "pin control support for R-Mobile APE6" if COMPILE_TEST
+	select PINCTRL_SH_PFC_GPIO
 
 config PINCTRL_PFC_SH7203
 	bool "pin control support for SH7203" if COMPILE_TEST
@@ -197,11 +200,6 @@ config PINCTRL_PFC_SH7269
 	bool "pin control support for SH7269" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
 
-config PINCTRL_PFC_SH73A0
-	bool "pin control support for SH-Mobile AG5" if COMPILE_TEST
-	select PINCTRL_SH_PFC_GPIO
-	select REGULATOR
-
 config PINCTRL_PFC_SH7720
 	bool "pin control support for SH7720" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
@@ -210,14 +208,6 @@ config PINCTRL_PFC_SH7722
 	bool "pin control support for SH7722" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
 
-config PINCTRL_PFC_SH7723
-	bool "pin control support for SH-Mobile R2" if COMPILE_TEST
-	select PINCTRL_SH_FUNC_GPIO
-
-config PINCTRL_PFC_SH7724
-	bool "pin control support for SH-Mobile R2R" if COMPILE_TEST
-	select PINCTRL_SH_FUNC_GPIO
-
 config PINCTRL_PFC_SH7734
 	bool "pin control support for SH7734" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
@@ -234,6 +224,19 @@ config PINCTRL_PFC_SH7786
 	bool "pin control support for SH7786" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
 
+config PINCTRL_PFC_SH73A0
+	bool "pin control support for SH-Mobile AG5" if COMPILE_TEST
+	select PINCTRL_SH_PFC_GPIO
+	select REGULATOR
+
+config PINCTRL_PFC_SH7723
+	bool "pin control support for SH-Mobile R2" if COMPILE_TEST
+	select PINCTRL_SH_FUNC_GPIO
+
+config PINCTRL_PFC_SH7724
+	bool "pin control support for SH-Mobile R2R" if COMPILE_TEST
+	select PINCTRL_SH_FUNC_GPIO
+
 config PINCTRL_PFC_SHX3
 	bool "pin control support for SH-X3" if COMPILE_TEST
 	select PINCTRL_SH_FUNC_GPIO
-- 
2.25.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux