From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
Renesas related pinctrl CONFIGs are located many places,
and it is confusable.
This patch collects these into same place,
and group into "Renesas pinctrl drivers" menu.
This patch also moves pinctrl-rz{a1,a2,n1}.c into sh-pfc folder.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
drivers/pinctrl/Kconfig | 32 ------------------
drivers/pinctrl/Makefile | 3 --
drivers/pinctrl/sh-pfc/Kconfig | 36 +++++++++++++++++++++
drivers/pinctrl/sh-pfc/Makefile | 4 +++
drivers/pinctrl/{ => sh-pfc}/pinctrl-rza1.c | 8 ++---
drivers/pinctrl/{ => sh-pfc}/pinctrl-rza2.c | 4 +--
drivers/pinctrl/{ => sh-pfc}/pinctrl-rzn1.c | 6 ++--
7 files changed, 49 insertions(+), 44 deletions(-)
rename drivers/pinctrl/{ => sh-pfc}/pinctrl-rza1.c (99%)
rename drivers/pinctrl/{ => sh-pfc}/pinctrl-rza2.c (99%)
rename drivers/pinctrl/{ => sh-pfc}/pinctrl-rzn1.c (99%)
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 8828613c4e0e..f63c5a04a3f7 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -213,38 +213,6 @@ config PINCTRL_ROCKCHIP
select GENERIC_IRQ_CHIP
select MFD_SYSCON
-config PINCTRL_RZA1
- bool "Renesas RZ/A1 gpio and pinctrl driver"
- depends on OF
- depends on ARCH_R7S72100 || COMPILE_TEST
- select GPIOLIB
- select GENERIC_PINCTRL_GROUPS
- select GENERIC_PINMUX_FUNCTIONS
- select GENERIC_PINCONF
- help
- This selects pinctrl driver for Renesas RZ/A1 platforms.
-
-config PINCTRL_RZA2
- bool "Renesas RZ/A2 gpio and pinctrl driver"
- depends on OF
- depends on ARCH_R7S9210 || COMPILE_TEST
- select GPIOLIB
- select GENERIC_PINCTRL_GROUPS
- select GENERIC_PINMUX_FUNCTIONS
- select GENERIC_PINCONF
- help
- This selects GPIO and pinctrl driver for Renesas RZ/A2 platforms.
-
-config PINCTRL_RZN1
- bool "Renesas RZ/N1 pinctrl driver"
- depends on OF
- depends on ARCH_RZN1 || COMPILE_TEST
- select GENERIC_PINCTRL_GROUPS
- select GENERIC_PINMUX_FUNCTIONS
- select GENERIC_PINCONF
- help
- This selects pinctrl driver for Renesas RZ/N1 devices.
-
config PINCTRL_SINGLE
tristate "One-register-per-pin type device tree based pinctrl driver"
depends on OF
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 1731b2154df9..1da9f28aecbd 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -30,9 +30,6 @@ obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o
obj-$(CONFIG_PINCTRL_PIC32) += pinctrl-pic32.o
obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o
obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o
-obj-$(CONFIG_PINCTRL_RZA1) += pinctrl-rza1.o
-obj-$(CONFIG_PINCTRL_RZA2) += pinctrl-rza2.o
-obj-$(CONFIG_PINCTRL_RZN1) += pinctrl-rzn1.o
obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
obj-$(CONFIG_PINCTRL_SIRF) += sirf/
obj-$(CONFIG_PINCTRL_SX150X) += pinctrl-sx150x.o
diff --git a/drivers/pinctrl/sh-pfc/Kconfig b/drivers/pinctrl/sh-pfc/Kconfig
index 8b2b1e1a9047..ff10bb2ed497 100644
--- a/drivers/pinctrl/sh-pfc/Kconfig
+++ b/drivers/pinctrl/sh-pfc/Kconfig
@@ -3,6 +3,8 @@
# Renesas SH and SH Mobile PINCTRL drivers
#
+menu "Renesas pinctrl drivers"
+
config PINCTRL_SH_PFC
bool "Renesas SoC pin control support" if COMPILE_TEST && !(ARCH_RENESAS || SUPERH)
default y if ARCH_RENESAS || SUPERH
@@ -53,6 +55,38 @@ config PINCTRL_SH_PFC
help
This enables pin control drivers for Renesas SuperH and ARM platforms
+config PINCTRL_RZA1
+ bool "RZ/A1 gpio and pinctrl driver"
+ depends on OF
+ depends on ARCH_R7S72100 || COMPILE_TEST
+ select GPIOLIB
+ select GENERIC_PINCTRL_GROUPS
+ select GENERIC_PINMUX_FUNCTIONS
+ select GENERIC_PINCONF
+ help
+ This selects pinctrl driver for Renesas RZ/A1 platforms.
+
+config PINCTRL_RZA2
+ bool "RZ/A2 gpio and pinctrl driver"
+ depends on OF
+ depends on ARCH_R7S9210 || COMPILE_TEST
+ select GPIOLIB
+ select GENERIC_PINCTRL_GROUPS
+ select GENERIC_PINMUX_FUNCTIONS
+ select GENERIC_PINCONF
+ help
+ This selects GPIO and pinctrl driver for Renesas RZ/A2 platforms.
+
+config PINCTRL_RZN1
+ bool "RZ/N1 pinctrl driver"
+ depends on OF
+ depends on ARCH_RZN1 || COMPILE_TEST
+ select GENERIC_PINCTRL_GROUPS
+ select GENERIC_PINMUX_FUNCTIONS
+ select GENERIC_PINCONF
+ help
+ This selects pinctrl driver for Renesas RZ/N1 devices.
+
config PINCTRL_SH_PFC_GPIO
select GPIOLIB
bool
@@ -203,3 +237,5 @@ config PINCTRL_PFC_SH7786
config PINCTRL_PFC_SHX3
bool "SH-X3 pin control support" if COMPILE_TEST
select PINCTRL_SH_FUNC_GPIO
+
+endmenu
diff --git a/drivers/pinctrl/sh-pfc/Makefile b/drivers/pinctrl/sh-pfc/Makefile
index 7bb99187cd8e..0b5640cf457b 100644
--- a/drivers/pinctrl/sh-pfc/Makefile
+++ b/drivers/pinctrl/sh-pfc/Makefile
@@ -43,6 +43,10 @@ obj-$(CONFIG_PINCTRL_PFC_SH7785) += pfc-sh7785.o
obj-$(CONFIG_PINCTRL_PFC_SH7786) += pfc-sh7786.o
obj-$(CONFIG_PINCTRL_PFC_SHX3) += pfc-shx3.o
+obj-$(CONFIG_PINCTRL_RZA1) += pinctrl-rza1.o
+obj-$(CONFIG_PINCTRL_RZA2) += pinctrl-rza2.o
+obj-$(CONFIG_PINCTRL_RZN1) += pinctrl-rzn1.o
+
ifeq ($(CONFIG_COMPILE_TEST),y)
CFLAGS_pfc-sh7203.o += -I$(srctree)/arch/sh/include/cpu-sh2a
CFLAGS_pfc-sh7264.o += -I$(srctree)/arch/sh/include/cpu-sh2a
diff --git a/drivers/pinctrl/pinctrl-rza1.c b/drivers/pinctrl/sh-pfc/pinctrl-rza1.c
similarity index 99%
rename from drivers/pinctrl/pinctrl-rza1.c
rename to drivers/pinctrl/sh-pfc/pinctrl-rza1.c
index 511f232ab7bc..a0cb586a46b7 100644
--- a/drivers/pinctrl/pinctrl-rza1.c
+++ b/drivers/pinctrl/sh-pfc/pinctrl-rza1.c
@@ -26,10 +26,10 @@
#include <linux/pinctrl/pinmux.h>
#include <linux/slab.h>
-#include "core.h"
-#include "devicetree.h"
-#include "pinconf.h"
-#include "pinmux.h"
+#include "../core.h"
+#include "../devicetree.h"
+#include "../pinconf.h"
+#include "../pinmux.h"
#define DRIVER_NAME "pinctrl-rza1"
diff --git a/drivers/pinctrl/pinctrl-rza2.c b/drivers/pinctrl/sh-pfc/pinctrl-rza2.c
similarity index 99%
rename from drivers/pinctrl/pinctrl-rza2.c
rename to drivers/pinctrl/sh-pfc/pinctrl-rza2.c
index c5bf98c86b2b..32829eb9656c 100644
--- a/drivers/pinctrl/pinctrl-rza2.c
+++ b/drivers/pinctrl/sh-pfc/pinctrl-rza2.c
@@ -17,8 +17,8 @@
#include <linux/of_device.h>
#include <linux/pinctrl/pinmux.h>
-#include "core.h"
-#include "pinmux.h"
+#include "../core.h"
+#include "../pinmux.h"
#define DRIVER_NAME "pinctrl-rza2"
diff --git a/drivers/pinctrl/pinctrl-rzn1.c b/drivers/pinctrl/sh-pfc/pinctrl-rzn1.c
similarity index 99%
rename from drivers/pinctrl/pinctrl-rzn1.c
rename to drivers/pinctrl/sh-pfc/pinctrl-rzn1.c
index 39538d40dbf3..ef5fb25b6016 100644
--- a/drivers/pinctrl/pinctrl-rzn1.c
+++ b/drivers/pinctrl/sh-pfc/pinctrl-rzn1.c
@@ -17,9 +17,9 @@
#include <linux/pinctrl/pinmux.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include "core.h"
-#include "pinconf.h"
-#include "pinctrl-utils.h"
+#include "../core.h"
+#include "../pinconf.h"
+#include "../pinctrl-utils.h"
/* Field positions and masks in the pinmux registers */
#define RZN1_L1_PIN_DRIVE_STRENGTH 10
--
2.25.1
