Re: [PATCH] media: rcar-vin: Update crop and compose settings for every s_fmt call

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/08/2020 21:21, Niklas wrote:
> Hi Lad, Hans,
> 
> On 2020-08-03 19:11:32 +0100, Lad, Prabhakar wrote:
>> Hi Hans,
>>
>> On Sat, Aug 1, 2020 at 10:04 AM Niklas <niklas.soderlund@xxxxxxxxxxxx> wrote:
>>>
>>> Hi Lad,
>>>
>>> Thanks for your work.
>>>
>>> On 2020-07-31 10:29:05 +0100, Lad Prabhakar wrote:
>>>> The crop and compose settings for VIN in non mc mode werent updated
>>>> in s_fmt call this resulted in captured images being clipped.
>>>>
>>>> With the below sequence on the third capture where size is set to
>>>> 640x480 resulted in clipped image of size 320x240.
>>>>
>>>> high(640x480) -> low (320x240) -> high (640x480)
>>>>
>>>> This patch makes sure the VIN crop and compose settings are updated.
>>>
>>> This is clearly an inconsistency in the VIN driver that should be fixed.
>>> But I think the none-mc mode implements the correct behavior. That is
>>> that S_FMT should not modify the crop/compose rectangles other then make
>>> sure they don't go out of bounds. This is an area we tried to clarify in
>>> the past but I'm still not sure what the correct answer to.
>>>
>> What should be the exact behaviour of the bridge driver  for s_fmt
>> call. Should the crop/compose settings be updated for every s_fmt
>> callback or should they be only updated on s_selection callback.
>> Currently the non-mc rcar-vin doesnt update the crop/compose setting
>> in s_fmt callback due to which I see the above issue as mentioned.
> 
> This is not entirely correct. It does update the crop and compose 
> rectangles on s_fmt, it makes sure they are not out-of-bounds for the 
> new format if it's accepted by s_fmt. See v4l2_rect_map_inside() calls 
> in the snippet bellow.

For non-mc mode s_fmt must update any crop/compose rectangles to ensure that
they are not out-of-bounds. But for mc mode the validation is done when you
start streaming, so I think s_fmt won't make any changes in that mode.

Double-check that with Laurent, though...

Regards,

	Hans

> 
> That being said there is a difference how this is handled in the VIN 
> driver between it's MC and non-MC modes and I would love to learn the 
> correct mode of operation and seeing VIN being updated to doing it 
> correct in both cases. Thanks Lad for dealing with this!
> 
>>
>> Cheers,
>> Prabhakar
>>
>>>>
>>>> Fixes: 104464f573d ("media: rcar-vin: Do not reset the crop and compose rectangles in s_fmt")
>>>> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>>>> Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
>>>> ---
>>>>  drivers/media/platform/rcar-vin/rcar-v4l2.c | 6 ++++++
>>>>  1 file changed, 6 insertions(+)
>>>>
>>>> diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
>>>> index f421e25..a9b13d9 100644
>>>> --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
>>>> +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
>>>> @@ -319,6 +319,12 @@ static int rvin_s_fmt_vid_cap(struct file *file, void *priv,
>>>>       fmt_rect.width = vin->format.width;
>>>>       fmt_rect.height = vin->format.height;
>>>>
>>>> +     vin->crop.top = 0;
>>>> +     vin->crop.left = 0;
>>>> +     vin->crop.width = vin->format.width;
>>>> +     vin->crop.height = vin->format.height;
>>>> +     vin->compose = vin->crop;
>>>> +
>>>>       v4l2_rect_map_inside(&vin->crop, &src_rect);
>>>>       v4l2_rect_map_inside(&vin->compose, &fmt_rect);
>>>>       vin->src_rect = src_rect;
>>>> --
>>>> 2.7.4
>>>>
>>>
>>> --
>>> Regards,
>>> Niklas Söderlund
> 




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux