Document HS and SS data bus for the "usb-role-switch" enabled case. Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> --- v1->v2: No change Ref:https://patchwork.kernel.org/patch/11669423/ --- .../bindings/usb/renesas,usb3-peri.yaml | 36 +++++++++++++++---- 1 file changed, 30 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml index e3cdeab1199f..3eb964af37b8 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml @@ -52,11 +52,24 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: phandle of a companion. - port: + ports: description: | any connector to the data bus of this controller should be modelled using the OF graph bindings specified, if the "usb-role-switch" property is used. + type: object + properties: + port@0: + type: object + description: High Speed (HS) data bus. + + port@1: + type: object + description: Super Speed (SS) data bus. + + required: + - port@0 + - port@1 required: - compatible @@ -79,9 +92,20 @@ examples: companion = <&xhci0>; usb-role-switch; - port { - usb3_role_switch: endpoint { - remote-endpoint = <&hd3ss3220_ep>; - }; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + usb3_hs_ep: endpoint { + remote-endpoint = <&hs_ep>; + }; + }; + port@1 { + reg = <1>; + usb3_role_switch: endpoint { + remote-endpoint = <&hd3ss3220_out_ep>; + }; + }; + }; }; -- 2.17.1
