Hi Jacopo, On Thu, Aug 6, 2020 at 3:44 PM Jacopo Mondi <jacopo@xxxxxxxxxx> wrote: > > Hello, > > On Mon, Aug 03, 2020 at 03:31:43PM +0100, Lad Prabhakar wrote: > > Hi All, > > > > This patch series fixes DVP support and enables BT656 mode in > > the driver. > > > > @Jacopo Mondi - patch 1/4 will collide with your patch series [1], > > feel free to merge it as part of your v2. > > This would actually make my life simpler, as one of the issues I had > was trying to make bus-type required to be able to differentiate > between different properties. > Thank you for taking care of it. Cheers, Prabhakar > > > > [1] https://www.spinics.net/lists/linux-renesas-soc/msg51236.html > > > > Cheers, > > Prabhakar > > > > Changes for v2: > > * Added support to fallback in parallel mode > > * Documented bus-type property > > * Added descriptive commit message for patch 2/4 as pointed > > by Sakari > > * Fixed review comments pointed by Laurent to have separate functions > > for mipi and dvp setup > > * Made sure the sensor is in power down mode during startup too for > > DVP mode > > > > Lad Prabhakar (4): > > dt-bindings: media: i2c: ov5640: Document bus-type property > > media: i2c: ov5640: Enable data pins on poweron for DVP mode > > media: i2c: ov5640: Add support for BT656 mode > > media: i2c: ov5640: Fallback to parallel mode > > > > .../devicetree/bindings/media/i2c/ov5640.txt | 9 +- > > drivers/media/i2c/ov5640.c | 333 ++++++++++-------- > > 2 files changed, 198 insertions(+), 144 deletions(-) > > > > -- > > 2.17.1 > >
