Re: [PATCH] pinctrl: sh-pfc: collect Renesas related CONFIGs in one place

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Morimoto-san,

On Tue, Aug 4, 2020 at 8:11 AM Kuninori Morimoto
<kuninori.morimoto.gx@xxxxxxxxxxx> wrote:
> From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
>
> Renesas related pinctrl CONFIGs are located many places when menuconfig,
> and it is confusable.
> This patch collects these into same place,
> and group into "Renesas pinctrl drivers" menu.
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>

Thanks for your patch!

> ---
>  drivers/pinctrl/Kconfig        | 32 ------------------------------
>  drivers/pinctrl/sh-pfc/Kconfig | 36 ++++++++++++++++++++++++++++++++++

Shouldn't the drivers be moved, and the Makefile be adapted, too?

The main reason why the RZ/A and RZ/N pin control drivers were not added
to the sh-pfc subdirectory is because they do not use the sh-pfc
framework.

Still, it may make sense to move them.
And perhaps rename the sh-pfc subdir to renesas?  It's the largest
subsystem shared by Renesas SuperH and ARM SoCs.

Linus: what's your opinion?
Thanks!

>  2 files changed, 36 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
> index 834c59950d1c..deb1ce8afbdb 100644
> --- a/drivers/pinctrl/Kconfig
> +++ b/drivers/pinctrl/Kconfig
> @@ -205,38 +205,6 @@ config PINCTRL_ROCKCHIP
>         select GENERIC_IRQ_CHIP
>         select MFD_SYSCON
>
> -config PINCTRL_RZA1
> -       bool "Renesas RZ/A1 gpio and pinctrl driver"
> -       depends on OF
> -       depends on ARCH_R7S72100 || COMPILE_TEST
> -       select GPIOLIB
> -       select GENERIC_PINCTRL_GROUPS
> -       select GENERIC_PINMUX_FUNCTIONS
> -       select GENERIC_PINCONF
> -       help
> -         This selects pinctrl driver for Renesas RZ/A1 platforms.
> -
> -config PINCTRL_RZA2
> -       bool "Renesas RZ/A2 gpio and pinctrl driver"
> -       depends on OF
> -       depends on ARCH_R7S9210 || COMPILE_TEST
> -       select GPIOLIB
> -       select GENERIC_PINCTRL_GROUPS
> -       select GENERIC_PINMUX_FUNCTIONS
> -       select GENERIC_PINCONF
> -       help
> -         This selects GPIO and pinctrl driver for Renesas RZ/A2 platforms.
> -
> -config PINCTRL_RZN1
> -       bool "Renesas RZ/N1 pinctrl driver"
> -       depends on OF
> -       depends on ARCH_RZN1 || COMPILE_TEST
> -       select GENERIC_PINCTRL_GROUPS
> -       select GENERIC_PINMUX_FUNCTIONS
> -       select GENERIC_PINCONF
> -       help
> -         This selects pinctrl driver for Renesas RZ/N1 devices.
> -
>  config PINCTRL_SINGLE
>         tristate "One-register-per-pin type device tree based pinctrl driver"
>         depends on OF
> diff --git a/drivers/pinctrl/sh-pfc/Kconfig b/drivers/pinctrl/sh-pfc/Kconfig
> index 9552851b96f1..4200a3dcbb30 100644
> --- a/drivers/pinctrl/sh-pfc/Kconfig
> +++ b/drivers/pinctrl/sh-pfc/Kconfig
> @@ -3,6 +3,8 @@
>  # Renesas SH and SH Mobile PINCTRL drivers
>  #
>
> +menu "Renesas pinctrl drivers"
> +
>  config PINCTRL_SH_PFC
>         bool "Renesas SoC pin control support" if COMPILE_TEST && !(ARCH_RENESAS || SUPERH)
>         default y if ARCH_RENESAS || SUPERH
> @@ -51,6 +53,38 @@ config PINCTRL_SH_PFC
>         help
>           This enables pin control drivers for Renesas SuperH and ARM platforms
>
> +config PINCTRL_RZA1
> +       bool "RZ/A1 gpio and pinctrl driver"
> +       depends on OF
> +       depends on ARCH_R7S72100 || COMPILE_TEST
> +       select GPIOLIB
> +       select GENERIC_PINCTRL_GROUPS
> +       select GENERIC_PINMUX_FUNCTIONS
> +       select GENERIC_PINCONF
> +       help
> +         This selects pinctrl driver for Renesas RZ/A1 platforms.
> +
> +config PINCTRL_RZA2
> +       bool "RZ/A2 gpio and pinctrl driver"
> +       depends on OF
> +       depends on ARCH_R7S9210 || COMPILE_TEST
> +       select GPIOLIB
> +       select GENERIC_PINCTRL_GROUPS
> +       select GENERIC_PINMUX_FUNCTIONS
> +       select GENERIC_PINCONF
> +       help
> +         This selects GPIO and pinctrl driver for Renesas RZ/A2 platforms.
> +
> +config PINCTRL_RZN1
> +       bool "RZ/N1 pinctrl driver"
> +       depends on OF
> +       depends on ARCH_RZN1 || COMPILE_TEST
> +       select GENERIC_PINCTRL_GROUPS
> +       select GENERIC_PINMUX_FUNCTIONS
> +       select GENERIC_PINCONF
> +       help
> +         This selects pinctrl driver for Renesas RZ/N1 devices.
> +
>  config PINCTRL_SH_PFC_GPIO
>         select GPIOLIB
>         bool
> @@ -195,3 +229,5 @@ config PINCTRL_PFC_SH7786
>  config PINCTRL_PFC_SHX3
>         bool "SH-X3 pin control support" if COMPILE_TEST
>         select PINCTRL_SH_FUNC_GPIO
> +
> +endmenu

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux