Re: [PATCH RESEND v7 1/3] dt-bindings: usb: hd3ss3220 device tree binding document

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Biju,

On Wed, Jul 15, 2020 at 1:42 PM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> > Subject: Re: [PATCH RESEND v7 1/3] dt-bindings: usb: hd3ss3220 device tree
> > binding document
> >
> > On Wed, Sep 4, 2019 at 10:22 AM Biju Das <biju.das@xxxxxxxxxxxxxx>
> > wrote:
> > > Add device tree binding document for TI HD3SS3220 Type-C DRP port
> > > controller driver.
> > >
> > > Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
> > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> >
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
> > > @@ -0,0 +1,38 @@
> > > +TI HD3SS3220 TypeC DRP Port Controller.
> > > +
> > > +Required properties:
> > > + - compatible: Must be "ti,hd3ss3220".
> > > + - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin.
> > > + - interrupts: An interrupt specifier.
> > > +
> > > +Required sub-node:
> > > + - connector: The "usb-c-connector" attached to the hd3ss3220 chip. The
> > > +   bindings of the connector node are specified in:
> > > +
> > > +       Documentation/devicetree/bindings/connector/usb-connector.txt
> > > +
> > > +Example:
> > > +hd3ss3220@47 {
> > > +       compatible = "ti,hd3ss3220";
> > > +       reg = <0x47>;
> > > +       interrupt-parent = <&gpio6>;
> > > +       interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> > > +
> > > +       connector {
> > > +               compatible = "usb-c-connector";
> > > +               label = "USB-C";
> > > +               data-role = "dual";
> > > +
> > > +               ports {
> > > +                       #address-cells = <1>;
> > > +                       #size-cells = <0>;
> > > +
> > > +                       port@1 {
> >
> > This does not comply with
> > Documentation/devicetree/bindings/connector/usb-connector.yaml:
> >
> >     connector: ports: 'port@0' is a required property
>
> But in RZ/G2E case, the connector is a SS capable connector.  May be we need to update required property
> as port@0 or port@1? Please let me know
>
>  -    required:
>  -      - port@0
>  +    anyOf:
>  +      - required:
>  +          - port@0
>  +      - required:
>  +          - port@1

May make sense.
I'd like to defer to the USB experts, though.

> > > +                               reg = <1>;
> > > +                               hd3ss3220_ep: endpoint {
> > > +                                       remote-endpoint = <&usb3_role_switch>;
> > > +                               };
> > > +                       };
> > > +               };
> > > +       };
> > > +};

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux