Hi Geert,
Thank you for the patch.
> -----Original Message-----
> From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> Sent: 06 July 2020 16:14
> To: Magnus Damm <magnus.damm@xxxxxxxxx>; Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> Cc: Chris Paterson <Chris.Paterson2@xxxxxxxxxxx>; linux-renesas-soc@xxxxxxxxxxxxxxx; Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> Subject: [PATCH] arm64: dts: renesas: cat875: Drop superfluous phy-mode
>
> The PHY mode already defaults to RGMII in the RZ/G2E base SoC DTS file,
> so there is no need to specify the same value in board files.
>
> Fixes: 6b170cd3ed02949f ("arm64: dts: renesas: cat875: Add ethernet support")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/renesas/cat875.dtsi | 1 -
> 1 file changed, 1 deletion(-)
>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Cheers,
--Prabhakar
> diff --git a/arch/arm64/boot/dts/renesas/cat875.dtsi b/arch/arm64/boot/dts/renesas/cat875.dtsi
> index aaefc3ae56d50960..33daa95706840037 100644
> --- a/arch/arm64/boot/dts/renesas/cat875.dtsi
> +++ b/arch/arm64/boot/dts/renesas/cat875.dtsi
> @@ -18,7 +18,6 @@
> pinctrl-names = "default";
> renesas,no-ether-link;
> phy-handle = <&phy0>;
> -phy-mode = "rgmii";
> status = "okay";
>
> phy0: ethernet-phy@0 {
> --
> 2.17.1
Renesas Electronics Europe GmbH, Geschaeftsfuehrer/President: Carsten Jauch, Sitz der Gesellschaft/Registered office: Duesseldorf, Arcadiastrasse 10, 40472 Duesseldorf, Germany, Handelsregister/Commercial Register: Duesseldorf, HRB 3708 USt-IDNr./Tax identification no.: DE 119353406 WEEE-Reg.-Nr./WEEE reg. no.: DE 14978647
