[PATCH v2 06/11] arm64: dts: renesas: Add HiHope RZ/G2M Rev.3.0/4.0 sub board support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The HiHope RZ/G2M sub board sits below the HiHope RZ/G2M Rev.3.0/4.0
main board.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@xxxxxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
 arch/arm64/boot/dts/renesas/Makefile          |  3 ++-
 .../dts/renesas/r8a774a1-hihope-rzg2m-ex.dts  | 21 +++++++++++++++++++
 2 files changed, 23 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 447947dfdb55..7878e6c2743f 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -1,7 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb \
 			       r8a774a1-hihope-rzg2m-rev2.dtb
-dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb \
+			       r8a774a1-hihope-rzg2m-rev2-ex.dtb
 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb
 dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2.dtb
 dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts
new file mode 100644
index 000000000000..a5ca86196a7b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 connected to
+ * sub board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2M with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m",
+		     "renesas,r8a774a1";
+};
+
+/* SW43 should be OFF, if in ON state SATA port will be activated */
+&pciec1 {
+	status = "okay";
+};
-- 
2.17.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux