Re: [PATCH v5 8/9] dt-bindings: adv748x: add information about serial audio interface (I2S/TDM)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Alex,

On 02/04/2020 19:35, Alex Riesen wrote:
> As the driver has some support for the audio interface of the device,
> the bindings file should mention it.
> 
> Signed-off-by: Alexander Riesen <alexander.riesen@xxxxxxxxxxx>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>


> --
> 
> v3: remove optionality off MCLK clock cell to ensure the description
>     matches the hardware no matter if the line is connected.
>     Suggested-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/media/i2c/adv748x.txt    | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> index 4f91686e54a6..50a753189b81 100644
> --- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> @@ -2,7 +2,9 @@
>  
>  The ADV7481 and ADV7482 are multi format video decoders with an integrated
>  HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB
> -from three input sources HDMI, analog and TTL.
> +from three input sources HDMI, analog and TTL. There is also support for an
> +I2S-compatible interface connected to the audio processor of the HDMI decoder.
> +The interface has TDM capability (8 slots, 32 bits, left or right justified).
>  
>  Required Properties:
>  
> @@ -16,6 +18,8 @@ Required Properties:
>      slave device on the I2C bus. The main address is mandatory, others are
>      optional and remain at default values if not specified.
>  
> +  - #clock-cells: must be <0>
> +
>  Optional Properties:
>  
>    - interrupt-names: Should specify the interrupts as "intrq1", "intrq2" and/or
> @@ -47,6 +51,7 @@ are numbered as follows.
>  	  TTL		sink		9
>  	  TXA		source		10
>  	  TXB		source		11
> +	  I2S		source		12
>  
>  The digital output port nodes, when present, shall contain at least one
>  endpoint. Each of those endpoints shall contain the data-lanes property as
> @@ -72,6 +77,7 @@ Example:
>  
>  		#address-cells = <1>;
>  		#size-cells = <0>;
> +		#clock-cells = <0>;
>  
>  		interrupt-parent = <&gpio6>;
>  		interrupt-names = "intrq1", "intrq2";
> @@ -113,4 +119,12 @@ Example:
>  				remote-endpoint = <&csi20_in>;
>  			};
>  		};
> +
> +		port@c {
> +			reg = <12>;
> +
> +			adv7482_i2s: endpoint {
> +				remote-endpoint = <&i2s_in>;
> +			};
> +		};
>  	};
> 

-- 
Regards
--
Kieran



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux