Hi Alex,
On 02/04/2020 19:34, Alex Riesen wrote:
> To avoid setting it up even if the hardware is not actually connected
> to anything physically.
>
> Besides, the bindings explicitly notes that port definitions are
> "optional if they are not connected to anything at the hardware level".
>
> Signed-off-by: Alexander Riesen <alexander.riesen@xxxxxxxxxxx>
> ---
> drivers/media/i2c/adv748x/adv748x-dai.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/media/i2c/adv748x/adv748x-dai.c b/drivers/media/i2c/adv748x/adv748x-dai.c
> index 185f78023e91..f9cc47fa9ad1 100644
> --- a/drivers/media/i2c/adv748x/adv748x-dai.c
> +++ b/drivers/media/i2c/adv748x/adv748x-dai.c
> @@ -216,6 +216,11 @@ int adv748x_dai_init(struct adv748x_dai *dai)
> int ret;
> struct adv748x_state *state = adv748x_dai_to_state(dai);
>
> + if (!state->endpoints[ADV748X_PORT_I2S]) {
> + adv_info(state, "no I2S port, DAI disabled\n");
> + ret = 0;
> + goto fail;
How about just 'return 0'?
> + }
And a blank line here ...
Otherwise,
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
This could also be folded into 5/9 too I guess?, though it is easier to
review the sequential additions, rather than the one-big-feature
addition ;-)
> dai->mclk_name = kasprintf(GFP_KERNEL, "%s.%s-i2s-mclk",
> state->dev->driver->name,
> dev_name(state->dev));
>
--
Regards
--
Kieran
