Beacon EmebddedWorks, formerly Logic PD is introducing a new
SOM and development kit based on the RZ/G2M SoC from Renesas.
The SOM supports eMMC, WiFi and Bluetooth, along with a Cat-M1
cellular radio.
The Baseboard has Ethernet, USB, HDMI, stereo audio in and out,
along with a vareity of push buttons and LED's.
Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
new file mode 100644
index 000000000000..750d14b35053
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -0,0 +1,733 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/clk/versaclock.h>
+
+/ {
+ aliases {
+ serial0 = &scif2;
+ serial1 = &hscif0;
+ serial2 = &hscif1;
+ serial3 = &scif0;
+ serial4 = &hscif2;
+ serial5 = &scif5;
+ spi0 = &msiof0;
+ spi1 = &msiof1;
+ spi2 = &msiof2;
+ spi3 = &msiof3;
+ ethernet0 = &avb;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ power-supply = <®_lcd>;
+ enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_HIGH>;
+ pwms = <&pwm0 0 50000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+
+ hdmi0-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi0_con: endpoint {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
+ };
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ key-1 {
+ gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_1>;
+ label = "Switch-1";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-2 {
+ gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_2>;
+ label = "Switch-2";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-3 {
+ gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_3>;
+ label = "Switch-3";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-4 {
+ gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_4>;
+ label = "Switch-4";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ key-5 {
+ gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_5>;
+ label = "Switch-4";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ led0 {
+ gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ label = "LED0";
+ linux,default-trigger = "heartbeat";
+ };
+ led1 {
+ gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ label = "LED1";
+ linux,default-trigger = "heartbeat";
+ };
+ led2 {
+ gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+ label = "LED2";
+ linux,default-trigger = "heartbeat";
+ };
+ led3 {
+ gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+ label = "LED3";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ lvds {
+ compatible = "panel-lvds";
+ power-supply = <®_lcd_reset>;
+ width-mm = <223>;
+ height-mm = <125>;
+ /*backlight is shared between lvds and parallel displays */
+ /*backlight = <&backlight>;*/
+ data-mapping = "vesa-24";
+
+ panel-timing {
+ /* 800x480@60Hz */
+ clock-frequency = <30000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hsync-len = <48>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ vfront-porch = <13>;
+ vback-porch = <29>;
+ vsync-len = <3>;
+ hsync-active = <1>;
+ vsync-active = <3>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ reg_audio: regulator_audio {
+ compatible = "regulator-fixed";
+ regulator-name = "audio-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio_exp2 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_lcd: regulator-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd_panel_pwr";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio_exp1 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_lcd_reset: regulator-lcd-reset {
+ compatible = "regulator-fixed";
+ regulator-name = "nLCD_RESET";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_lcd>;
+ };
+
+ reg_cam0: regulator_camera {
+ compatible = "regulator-fixed";
+ regulator-name = "reg_cam0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio_exp2 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_cam1: regulator_camera {
+ compatible = "regulator-fixed";
+ regulator-name = "reg_cam1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio_exp2 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <100000>;
+ };
+
+ sound_card {
+ compatible = "audio-graph-card";
+ label = "rcar-sound";
+ dais = <&rsnd_port0>, <&rsnd_port1>;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1>, <1800000 0>;
+ regulator-always-on;
+ };
+
+ /* External DU dot clocks */
+ x302_clk: x302-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <33000000>;
+ };
+
+ x304_clk: x304-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+};
+
+&audio_clk_a {
+ clock-frequency = <22579200>;
+};
+
+&audio_clk_b {
+ clock-frequency = <22579200>;
+};
+
+&can0 {
+ pinctrl-0 = <&can0_pins>;
+ pinctrl-names = "default";
+ renesas,can-clock-select = <0x0>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-0 = <&can1_pins>;
+ pinctrl-names = "default";
+ renesas,can-clock-select = <0x0>;
+ status = "okay";
+};
+
+&cmt0 {
+ status = "okay";
+};
+
+&cmt1 {
+ status = "okay";
+};
+
+&cmt2 {
+ status = "okay";
+};
+
+&cmt3 {
+ status = "okay";
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&versaclock5 1>,
+ <&x302_clk>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.2",
+ "dclkin.0", "dclkin.1", "dclkin.2";
+};
+
+&ehci0 {
+ dr_mode = "otg";
+ status = "okay";
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&versaclock5 3>, <&versaclock6_bb 4>;
+};
+
+&ehci1 {
+ status = "okay";
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&versaclock5 4>;
+};
+
+&hdmi0 {
+ status = "okay";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dw_hdmi0_in: endpoint {
+ remote-endpoint = <&du_out_hdmi0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi0_con>;
+ };
+ };
+ port@2 {
+ /* HDMI sound */
+ reg = <2>;
+ dw_hdmi0_snd_in: endpoint {
+ remote-endpoint = <&rsnd_endpoint1>;
+ };
+ };
+ };
+};
+
+&hscif1 {
+ pinctrl-0 = <&hscif1_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&hsusb {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ gpio_exp2: gpio@21 {
+ compatible = "onnn,pca9654";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_exp3: gpio@22 {
+ compatible = "onnn,pca9654";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ versaclock6_bb: versaclock6_bb@6a {
+ compatible = "idt,5p49v6965";
+ reg = <0x6a>;
+ #clock-cells = <1>;
+ clocks = <&x304_clk>;
+ clock-names = "xin";
+ /* CSI0_MCLK, CSI1_MCLK, AUDIO_CLKIN, USB_HUB_MCLK_BB */
+ assigned-clocks = <&versaclock6_bb 1>,
+ <&versaclock6_bb 2>,
+ <&versaclock6_bb 3>,
+ <&versaclock6_bb 4>;
+ assigned-clock-rates = <24000000>, <24000000>, <24000000>, <24000000>;
+
+ OUT1 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolts = <1800000>;
+ idt,slew-percent = <100>;
+ };
+
+ OUT2 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolts = <1800000>;
+ idt,slew-percent = <100>;
+ };
+
+ OUT3 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolts = <1800000>;
+ idt,slew-percent = <100>;
+ };
+
+ OUT4 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolts = <3300000>;
+ idt,slew-percent = <100>;
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+};
+
+&i2c5 {
+ status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-0 = <&i2c5_pins>;
+ pinctrl-names = "default";
+
+ codec: wm8962@1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ DCVDD-supply = <®_audio>;
+ DBVDD-supply = <®_audio>;
+ AVDD-supply = <®_audio>;
+ CPVDD-supply = <®_audio>;
+ MICVDD-supply = <®_audio>;
+ PLLVDD-supply = <®_audio>;
+ SPKVDD1-supply = <®_audio>;
+ SPKVDD2-supply = <®_audio>;
+ gpio-cfg = <
+ 0x0000 /* 0:Default */
+ 0x0000 /* 1:Default */
+ 0x0000 /* 2:Default */
+ 0x0000 /* 3:Default */
+ 0x0000 /* 4:Default */
+ 0x0000 /* 5:Default */
+ >;
+ port {
+ wm8962_endpoint: endpoint {
+ remote-endpoint = <&rsnd_endpoint0>;
+ };
+ };
+ };
+
+ /* 0 - lcd_reset */
+ /* 1 - lcd_pwr */
+ /* 2 - lcd_select */
+ /* 3 - backlight-enable */
+ /* 4 - Touch_shdwn */
+ /* 5 - LCD_H_pol */
+ /* 6 - lcd_V_pol */
+ gpio_exp1: gpio@20 {
+ compatible = "onnn,pca9654";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ touchscreen@26 {
+ compatible = "ilitek,ili2117";
+ reg = <0x26>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+ wakeup-source;
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&ohci0 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pciec0 {
+ status = "okay";
+};
+
+&pciec1 {
+ status = "okay";
+};
+
+&pcie_bus_clk {
+ clock-frequency = <100000000>;
+};
+
+&pfc {
+ can0_pins: can0 {
+ groups = "can0_data_a";
+ function = "can0";
+ };
+
+ can1_pins: can1 {
+ groups = "can1_data";
+ function = "can1";
+ };
+
+ du_pins: du {
+ groups = "du_rgb888", "du_sync", "du_clk_out_1", "du_disp";
+ function = "du";
+ };
+
+ i2c2_pins: i2c2 {
+ groups = "i2c2_a";
+ function = "i2c2";
+ };
+
+ i2c5_pins: i2c5 {
+ groups = "i2c5";
+ function = "i2c5";
+ };
+
+ led_pins: leds {
+ /* GP_0_4 , AVS1, AVS2, GP_7_3 */
+ pins = "GP_0_4", "GP_7_0", "GP_7_1", "GP_7_3";
+ bias-pull-down;
+ };
+
+ msiof1_pins: msiof1 {
+ groups = "msiof1_clk_g", "msiof1_rxd_g", "msiof1_txd_g";
+ function = "msiof1";
+ };
+
+ pwm0_pins: pwm0 {
+ groups = "pwm0";
+ function = "pwm0";
+ };
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ sdhi0_pins_uhs: sd0_uhs {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <1800>;
+ };
+
+ sound_pins: sound {
+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+ function = "ssi";
+ };
+
+ sound_clk_pins: sound_clk {
+ groups = "audio_clk_a_a";
+ function = "audio_clk";
+ };
+
+ usb0_pins: usb0 {
+ mux {
+ groups = "usb0";
+ function = "usb0";
+ };
+ };
+
+ usb1_pins: usb1 {
+ mux {
+ groups = "usb1";
+ function = "usb1";
+ };
+ };
+
+ usb30_pins: usb30 {
+ mux {
+ groups = "usb30";
+ function = "usb30";
+ };
+ };
+};
+
+&pwm0 {
+ pinctrl-0 = <&pwm0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-names = "default";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ /* audio_clkout0/1/2/3 */
+ #clock-cells = <1>;
+ clock-frequency = <11289600>;
+
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
+ <&cpg CPG_CORE R8A774A1_CLK_S0D4>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rsnd_port0: port@0 {
+ reg = <0>;
+ rsnd_endpoint0: endpoint {
+ remote-endpoint = <&wm8962_endpoint>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_endpoint0>;
+ frame-master = <&rsnd_endpoint0>;
+
+ playback = <&ssi1 &dvc1 &src1>;
+ capture = <&ssi0>;
+ };
+ };
+ rsnd_port1: port@1 {
+ reg = <0x01>;
+ rsnd_endpoint1: endpoint {
+ remote-endpoint = <&dw_hdmi0_snd_in>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_endpoint1>;
+ frame-master = <&rsnd_endpoint1>;
+
+ playback = <&ssi2>;
+ };
+ };
+ };
+};
+
+&rwdt {
+ status = "okay";
+ timeout-sec = <60>;
+};
+
+&scif0 {
+ pinctrl-0 = <&scif0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&scif5 {
+ pinctrl-0 = <&scif5_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&ssi1 {
+ shared-pin;
+};
+
+&tmu0 {
+ status = "okay";
+};
+
+&tmu1 {
+ status = "okay";
+};
+
+&tmu2 {
+ status = "okay";
+};
+
+&tmu3 {
+ status = "okay";
+};
+
+&tmu4 {
+ status = "okay";
+};
+
+&usb2_phy0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usb2_phy1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&vin0 {
+ status = "okay";
+};
+&vin1 {
+ status = "okay";
+};
+&vin2 {
+ status = "okay";
+};
+&vin3 {
+ status = "okay";
+};
+&vin4 {
+ status = "okay";
+};
+&vin5 {
+ status = "okay";
+};
+&vin6 {
+ status = "okay";
+};
+&vin7 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
new file mode 100644
index 000000000000..46b61cb6a4a5
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/versaclock.h>
+
+/ {
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x78000000>;
+ };
+
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x80000000>;
+ };
+
+ osc_32k: osc_32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "osc_32k";
+ };
+
+ reg_1p8v: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ wlan_pwrseq: wlan_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pca9654 1 GPIO_ACTIVE_LOW>;
+ clocks = <&osc_32k>;
+ clock-names = "ext_clock";
+ post-power-on-delay-ms = <80>;
+ };
+};
+
+&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+ clock-frequency = <32768>;
+};
+
+&gpio6 {
+ usb_hub_reset {
+ gpio-hog;
+ gpios = <10 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb-hub-reset";
+ };
+};
+
+&hscif0 {
+ pinctrl-0 = <&hscif0_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+ status = "okay";
+ max-speed = <4000000>;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&pca9654 2 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&pca9654 5 GPIO_ACTIVE_HIGH>;
+ clocks = <&osc_32k>;
+ clock-names = "extclk";
+ };
+};
+
+&hscif2 {
+ status = "okay";
+ pinctrl-0 = <&hscif2_pins>;
+ pinctrl-names = "default";
+};
+
+&i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pca9654: gpio@20 {
+ compatible = "onnn,pca9654";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "i2c4_20_0",
+ "wl_reg_on",
+ "bt_reg_on",
+ "i2c4_20_3",
+ "i2c4_20_4",
+ "bt_dev_wake",
+ "i2c4_20_6",
+ "i2c4_20_7";
+ };
+
+ pca9654_lte: gpio@21 {
+ compatible = "onnn,pca9654";
+ reg = <0x21>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "i2c4_21_0",
+ "zoe_pwr_on",
+ "zoe_extint",
+ "zoe_reset_n",
+ "sara_reset",
+ "i2c4_21_5",
+ "sara_pwr_off",
+ "sara_networking_status";
+ };
+
+ eeprom@50 {
+ compatible = "microchip, at24c64", "atmel,24c64";
+ pagesize = <32>;
+ read-only; /* Manufacturing EEPROM programmed at factory */
+ reg = <0x50>;
+ };
+
+ rtc@51 {
+ compatible = "nxp,pcf85263";
+ reg = <0x51>;
+ };
+
+ versaclock5: versaclock_som@6a {
+ compatible = "idt,5p49v6965";
+ reg = <0x6a>;
+ #clock-cells = <1>;
+ clocks = <&x304_clk>;
+ clock-names = "xin";
+ /* du_dotclkin0, du_dotclkin2, usb_extal, avb_txcrefclk */
+ assigned-clocks = <&versaclock5 1>,
+ <&versaclock5 2>,
+ <&versaclock5 3>,
+ <&versaclock5 4>;
+ assigned-clock-rates = <33333333>, <33333333>, <50000000>, <125000000>;
+
+ OUT1 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolts = <1800000>;
+ idt,slew-percent = <100>;
+ };
+
+ OUT2 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolts = <1800000>;
+ idt,slew-percent = <100>;
+ };
+
+ OUT3 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolts = <1800000>;
+ idt,slew-percent = <100>;
+ };
+
+ OUT4 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolts = <3300000>;
+ idt,slew-percent = <100>;
+ };
+ };
+};
+
+&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
+ avb_pins: avb {
+ mux {
+ groups = "avb_link", "avb_mdio", "avb_mii";
+ function = "avb";
+ };
+
+ pins_mdio {
+ groups = "avb_mdio";
+ drive-strength = <24>;
+ };
+
+ pins_mii_tx {
+ pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+ "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+ drive-strength = <12>;
+ };
+ };
+
+ scif2_pins: scif2 {
+ groups = "scif2_data_a";
+ function = "scif2";
+ };
+
+ hscif0_pins: hscif0 {
+ groups = "hscif0_data", "hscif0_ctrl";
+ function = "hscif0";
+ };
+
+ hscif1_pins: hscif1 {
+ groups = "hscif1_data_a", "hscif1_ctrl_a";
+ function = "hscif1";
+ };
+
+ hscif2_pins: hscif2 {
+ groups = "hscif2_data_a";
+ function = "hscif2";
+ };
+
+ scif0_pins: scif0 {
+ groups = "scif0_data";
+ function = "scif0";
+ };
+
+ scif5_pins: scif5 {
+ groups = "scif5_data_a";
+ function = "scif5";
+ };
+
+ scif_clk_pins: scif_clk {
+ groups = "scif_clk_a";
+ function = "scif_clk";
+ };
+
+ i2c0_pins: i2c0 {
+ groups = "i2c0";
+ function = "i2c0";
+ };
+
+ sdhi2_pins: sd2 {
+ groups = "sdhi2_data4", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <1800>;
+ };
+
+ sdhi3_pins: sd3 {
+ groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
+ function = "sdhi3";
+ power-source = <1800>;
+ };
+};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sdhi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhi2_pins>;
+ bus-width = <4>;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ non-removable;
+ cap-power-off-card;
+ pm-ignore-notify;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&wlan_pwrseq>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&gpio1>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "host-wake";
+ };
+};
+
+&sdhi3 {
+ pinctrl-0 = <&sdhi3_pins>;
+ pinctrl-1 = <&sdhi3_pins>;
+ pinctrl-names = "default", "state_uhs";
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ fixed-emmc-driver-type = <1>;
+ status = "okay";
+};
+
+&usb_extal_clk {
+ clock-frequency = <50000000>;
+};
+
+&usb3s0_clk {
+ clock-frequency = <100000000>;
+};
+
+&vspb {
+ status = "okay";
+};
+
+&vspi0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
new file mode 100644
index 000000000000..e7ed5d480618
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "r8a774a1.dtsi"
+#include "beacon-renesom-som.dtsi"
+#include "beacon-renesom-baseboard.dtsi"
+
+/ {
+ model = "Beacon Embedded Works RZ/G2M Development Kit";
+ compatible = "beacon,beacon-rzg2m", "renesas,r8a774a1";
+};
--
2.25.1
