[PATCH] mmc: renesas_sdhi: don't lose RPM savings because of manual clk handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The SDHI driver en-/disabled clocks on its own during probe() and
remove(). This basically killed all potential RPM power savings. Now, we
just enable the clocks for a short time when we access registers in
probe(). We otherwise leave all handling to RPM. That means, we need to
shift the RPM enabling code in the TMIO core a bit up, so we can access
registers there, too.

clk_summary before:
sd0                   1        1        0    12480000          0     0  50000
   sdif0              2        2        0    12480000          0     0  50000

clk_summary after:
sd0                   1        1        0    12480000          0     0  50000
   sdif0              1        1        0    12480000          0     0  50000

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---

Tested on a Salvator-XS board with R-Car M3-N.

 drivers/mmc/host/renesas_sdhi_core.c |  7 +++----
 drivers/mmc/host/tmio_mmc_core.c     | 14 +++++++-------
 2 files changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index ff72b381a6b3..d581142634f8 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -910,6 +910,8 @@ int renesas_sdhi_probe(struct platform_device *pdev,
 		goto efree;
 
 	ver = sd_ctrl_read16(host, CTL_VERSION);
+	renesas_sdhi_clk_disable(host);
+
 	/* GEN2_SDR104 is first known SDHI to use 32bit block count */
 	if (ver < SDHI_VER_GEN2_SDR104 && mmc_data->max_blk_count > U16_MAX)
 		mmc_data->max_blk_count = U16_MAX;
@@ -920,7 +922,7 @@ int renesas_sdhi_probe(struct platform_device *pdev,
 
 	ret = tmio_mmc_host_probe(host);
 	if (ret < 0)
-		goto edisclk;
+		goto efree;
 
 	/* Enable tuning iff we have an SCC and a supported mode */
 	if (of_data && of_data->scc_offset &&
@@ -985,8 +987,6 @@ int renesas_sdhi_probe(struct platform_device *pdev,
 
 eirq:
 	tmio_mmc_host_remove(host);
-edisclk:
-	renesas_sdhi_clk_disable(host);
 efree:
 	tmio_mmc_host_free(host);
 
@@ -999,7 +999,6 @@ int renesas_sdhi_remove(struct platform_device *pdev)
 	struct tmio_mmc_host *host = platform_get_drvdata(pdev);
 
 	tmio_mmc_host_remove(host);
-	renesas_sdhi_clk_disable(host);
 
 	return 0;
 }
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 9a4ae954553b..6968177dd1cd 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -1116,6 +1116,13 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
 
 	_host->set_pwr = pdata->set_pwr;
 
+	dev_pm_domain_start(&pdev->dev);
+	pm_runtime_get_noresume(&pdev->dev);
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
 	ret = tmio_mmc_init_ocr(_host);
 	if (ret < 0)
 		return ret;
@@ -1192,13 +1199,6 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
 	/* See if we also get DMA */
 	tmio_mmc_request_dma(_host, pdata);
 
-	dev_pm_domain_start(&pdev->dev);
-	pm_runtime_get_noresume(&pdev->dev);
-	pm_runtime_set_active(&pdev->dev);
-	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
-	pm_runtime_use_autosuspend(&pdev->dev);
-	pm_runtime_enable(&pdev->dev);
-
 	ret = mmc_add_host(mmc);
 	if (ret)
 		goto remove_host;
-- 
2.20.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux