[PATCH v10 3/8] PCI: rcar: Fix calculating mask for PCIEPAMR register

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The mask value was calculated incorrectly for PCIEPAMR register if the
size was less than 128 bytes. Fix this issue by adding a check on size.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
 drivers/pci/controller/pcie-rcar.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c
index cf8840d180c3..7583699ef7b6 100644
--- a/drivers/pci/controller/pcie-rcar.c
+++ b/drivers/pci/controller/pcie-rcar.c
@@ -76,7 +76,10 @@ void rcar_pcie_set_outbound(struct rcar_pcie *pcie, int win,
 	 * keeps things pretty simple.
 	 */
 	size = resource_size(res);
-	mask = (roundup_pow_of_two(size) / SZ_128) - 1;
+	if (size > 128)
+		mask = (roundup_pow_of_two(size) / SZ_128) - 1;
+	else
+		mask = 0x0;
 	rcar_pci_write_reg(pcie, mask << 7, PCIEPAMR(win));
 
 	if (res->flags & IORESOURCE_IO)
-- 
2.17.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux