Re: [PATCH v5] media: rcar-csi2: Correct the selection of hsfreqrange

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Suresh, Niklas,

I think that we should not change the structs for PHTW register configuration,
because there are no "max" values in the table "PHTW Set Values" from the
Renesas Hardware Manual. The patch looks just wrong. A major issue is also
that the Hardware Manual does not provide any algorithm, how to select the
right table entry for the configuration of PHTW and PHYPLL registers, so we
can not say for sure that the patch is correct. It is also not clear, what
are the "default" bit rates? It looks like they are made exactly for usage
in driver code:
 - both PHTW and PHYPLL tables have "default" values
 - only PHYPLL (HSFREQRANGE) tables have min/max values and it requires
   additional rounding in order to hardcode them in a driver
But these are just my speculations. If they are correct, then the only
exception, where the patch v2 failed, could be a typo in the Hardware Manual.
Otherwise patch v2 looks much better to me. I think, we should wait for more
details from Renesas before fixing this issue. 

On Thu, Apr 30, 2020 at 03:03:10PM +0900, Suresh Udipi wrote:
> hsfreqrange should be chosen based on the calculated mbps which
> is within the range as per table[1]. But current calculation
> always selects first value which is greater than or equal to the
> calculated mbps which may lead to chosing a wrong range in some cases.
> 
> For example for 360 mbps for H3/M3N
> Existing logic selects
> Calculated value 360Mbps : Default 400Mbps Range [368.125 -433.125 mbps]
> 
> This hsfreqrange is out of range.
> 
> The logic is changed to select the first hsfreqrange whose max range[1] is
> greater than the calculated bit rate.
> 
> Calculated value 360Mbps : max range 380.625 mbps is selected
>  i.e Default 350Mbps  Range [320.625 -380.625 mpbs]
> 
> [1] specs r19uh0105ej0200-r-car-3rd-generation.pdf [Table 25.9]
> 
> Fixes: 769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
> 
> Signed-off-by: Suresh Udipi <sudipi@xxxxxxxxxxxxxx>
> Signed-off-by: Kazuyoshi Akiyama <akiyama@xxxxxxxxxxxxx>
> ---
>  Changes in v2:
>   - Added the boundary check for the maximum bit rate.
> 
>   - Simplified the logic by remmoving range check
>     as only the closest default value covers most
>     of the use cases.
> 
>   - Aligning the commit message based on the above change
> 
> 
>  Changes in v3:
>     - Added max member from struct rcsi2_mbps_reg.
>       mbps varialbe cannot be removed from rcsi2_mbps_reg,
>       since this structure is reused for
>       phtw_mbps_h3_v3h_m3n/phtw_mbps_v3m_e3 where mbps is
>       used.
> 
> 
>    -  Update the walk of the array in rcsi2_set_phypll() so that it finds
>       the first entry where the calculated bit rate is less than the max.
> 
>    - Support lower bit rates less than 80Mbps like 48Mbps
>      (Raspberry pi camera 640x480 connected to Kingfisher)
>      can also be supported by selecting the lowest default bit rate 80Mbps
>      as done before this fix
> 
>    - Alignement of the commit message based on above changes.
> 
>  Changes in v4:
>    - Remove unncessary braces.
>  
>  Changes in v5:
>    - Removed mbps variable in rcsi2_mbps_reg and aligned all 
>      tables accordingly
> 
>  drivers/media/platform/rcar-vin/rcar-csi2.c | 282 ++++++++++++++--------------
>  1 file changed, 141 insertions(+), 141 deletions(-)
> 
> diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
> index faa9fb2..d45bf80 100644
> --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> @@ -132,63 +132,63 @@ struct phtw_value {
>  };
>  
>  struct rcsi2_mbps_reg {
> -	u16 mbps;
>  	u16 reg;
> +	u16 max;
>  };
>  
>  static const struct rcsi2_mbps_reg phtw_mbps_h3_v3h_m3n[] = {
> -	{ .mbps =   80, .reg = 0x86 },
> -	{ .mbps =   90, .reg = 0x86 },
> -	{ .mbps =  100, .reg = 0x87 },
> -	{ .mbps =  110, .reg = 0x87 },
> -	{ .mbps =  120, .reg = 0x88 },
> -	{ .mbps =  130, .reg = 0x88 },
> -	{ .mbps =  140, .reg = 0x89 },
> -	{ .mbps =  150, .reg = 0x89 },
> -	{ .mbps =  160, .reg = 0x8a },
> -	{ .mbps =  170, .reg = 0x8a },
> -	{ .mbps =  180, .reg = 0x8b },
> -	{ .mbps =  190, .reg = 0x8b },
> -	{ .mbps =  205, .reg = 0x8c },
> -	{ .mbps =  220, .reg = 0x8d },
> -	{ .mbps =  235, .reg = 0x8e },
> -	{ .mbps =  250, .reg = 0x8e },
> +	{ .reg = 0x86, .max =  80  },
> +	{ .reg = 0x86, .max =  90  },
> +	{ .reg = 0x87, .max =  100 },
> +	{ .reg = 0x87, .max =  110 },
> +	{ .reg = 0x88, .max =  120 },
> +	{ .reg = 0x88, .max =  130 },
> +	{ .reg = 0x89, .max =  140 },
> +	{ .reg = 0x89, .max =  150 },
> +	{ .reg = 0x8a, .max =  160 },
> +	{ .reg = 0x8a, .max =  170 },
> +	{ .reg = 0x8b, .max =  180 },
> +	{ .reg = 0x8b, .max =  190 },
> +	{ .reg = 0x8c, .max =  205 },
> +	{ .reg = 0x8d, .max =  220 },
> +	{ .reg = 0x8e, .max =  235 },
> +	{ .reg = 0x8e, .max =  250 },
>  	{ /* sentinel */ },
>  };
>  
>  static const struct rcsi2_mbps_reg phtw_mbps_v3m_e3[] = {
> -	{ .mbps =   80, .reg = 0x00 },
> -	{ .mbps =   90, .reg = 0x20 },
> -	{ .mbps =  100, .reg = 0x40 },
> -	{ .mbps =  110, .reg = 0x02 },
> -	{ .mbps =  130, .reg = 0x22 },
> -	{ .mbps =  140, .reg = 0x42 },
> -	{ .mbps =  150, .reg = 0x04 },
> -	{ .mbps =  170, .reg = 0x24 },
> -	{ .mbps =  180, .reg = 0x44 },
> -	{ .mbps =  200, .reg = 0x06 },
> -	{ .mbps =  220, .reg = 0x26 },
> -	{ .mbps =  240, .reg = 0x46 },
> -	{ .mbps =  250, .reg = 0x08 },
> -	{ .mbps =  270, .reg = 0x28 },
> -	{ .mbps =  300, .reg = 0x0a },
> -	{ .mbps =  330, .reg = 0x2a },
> -	{ .mbps =  360, .reg = 0x4a },
> -	{ .mbps =  400, .reg = 0x0c },
> -	{ .mbps =  450, .reg = 0x2c },
> -	{ .mbps =  500, .reg = 0x0e },
> -	{ .mbps =  550, .reg = 0x2e },
> -	{ .mbps =  600, .reg = 0x10 },
> -	{ .mbps =  650, .reg = 0x30 },
> -	{ .mbps =  700, .reg = 0x12 },
> -	{ .mbps =  750, .reg = 0x32 },
> -	{ .mbps =  800, .reg = 0x52 },
> -	{ .mbps =  850, .reg = 0x72 },
> -	{ .mbps =  900, .reg = 0x14 },
> -	{ .mbps =  950, .reg = 0x34 },
> -	{ .mbps = 1000, .reg = 0x54 },
> -	{ .mbps = 1050, .reg = 0x74 },
> -	{ .mbps = 1125, .reg = 0x16 },
> +	{ .reg = 0x00, .max = 80   },
> +	{ .reg = 0x20, .max = 90   },
> +	{ .reg = 0x40, .max = 100  },
> +	{ .reg = 0x02, .max = 110  },
> +	{ .reg = 0x22, .max = 130  },
> +	{ .reg = 0x42, .max = 140  },
> +	{ .reg = 0x04, .max = 150  },
> +	{ .reg = 0x24, .max = 170  },
> +	{ .reg = 0x44, .max = 180  },
> +	{ .reg = 0x06, .max = 200  },
> +	{ .reg = 0x26, .max = 220  },
> +	{ .reg = 0x46, .max = 240  },
> +	{ .reg = 0x08, .max = 250  },
> +	{ .reg = 0x28, .max = 270  },
> +	{ .reg = 0x0a, .max = 300  },
> +	{ .reg = 0x2a, .max = 330  },
> +	{ .reg = 0x4a, .max = 360  },
> +	{ .reg = 0x0c, .max = 400  },
> +	{ .reg = 0x2c, .max = 450  },
> +	{ .reg = 0x0e, .max = 500  },
> +	{ .reg = 0x2e, .max = 550  },
> +	{ .reg = 0x10, .max = 600  },
> +	{ .reg = 0x30, .max = 650  },
> +	{ .reg = 0x12, .max = 700  },
> +	{ .reg = 0x32, .max = 750  },
> +	{ .reg = 0x52, .max = 800  },
> +	{ .reg = 0x72, .max = 850  },
> +	{ .reg = 0x14, .max = 900  },
> +	{ .reg = 0x34, .max = 950  },
> +	{ .reg = 0x54, .max = 1000 },
> +	{ .reg = 0x74, .max = 1050 },
> +	{ .reg = 0x16, .max = 1125 },
>  	{ /* sentinel */ },
>  };
>  
> @@ -201,96 +201,96 @@ static const struct rcsi2_mbps_reg phtw_mbps_v3m_e3[] = {
>  #define PHYPLL_HSFREQRANGE(n)		((n) << 16)
>  
>  static const struct rcsi2_mbps_reg hsfreqrange_h3_v3h_m3n[] = {
> -	{ .mbps =   80, .reg = 0x00 },
> -	{ .mbps =   90, .reg = 0x10 },
> -	{ .mbps =  100, .reg = 0x20 },
> -	{ .mbps =  110, .reg = 0x30 },
> -	{ .mbps =  120, .reg = 0x01 },
> -	{ .mbps =  130, .reg = 0x11 },
> -	{ .mbps =  140, .reg = 0x21 },
> -	{ .mbps =  150, .reg = 0x31 },
> -	{ .mbps =  160, .reg = 0x02 },
> -	{ .mbps =  170, .reg = 0x12 },
> -	{ .mbps =  180, .reg = 0x22 },
> -	{ .mbps =  190, .reg = 0x32 },
> -	{ .mbps =  205, .reg = 0x03 },
> -	{ .mbps =  220, .reg = 0x13 },
> -	{ .mbps =  235, .reg = 0x23 },
> -	{ .mbps =  250, .reg = 0x33 },
> -	{ .mbps =  275, .reg = 0x04 },
> -	{ .mbps =  300, .reg = 0x14 },
> -	{ .mbps =  325, .reg = 0x25 },
> -	{ .mbps =  350, .reg = 0x35 },
> -	{ .mbps =  400, .reg = 0x05 },
> -	{ .mbps =  450, .reg = 0x16 },
> -	{ .mbps =  500, .reg = 0x26 },
> -	{ .mbps =  550, .reg = 0x37 },
> -	{ .mbps =  600, .reg = 0x07 },
> -	{ .mbps =  650, .reg = 0x18 },
> -	{ .mbps =  700, .reg = 0x28 },
> -	{ .mbps =  750, .reg = 0x39 },
> -	{ .mbps =  800, .reg = 0x09 },
> -	{ .mbps =  850, .reg = 0x19 },
> -	{ .mbps =  900, .reg = 0x29 },
> -	{ .mbps =  950, .reg = 0x3a },
> -	{ .mbps = 1000, .reg = 0x0a },
> -	{ .mbps = 1050, .reg = 0x1a },
> -	{ .mbps = 1100, .reg = 0x2a },
> -	{ .mbps = 1150, .reg = 0x3b },
> -	{ .mbps = 1200, .reg = 0x0b },
> -	{ .mbps = 1250, .reg = 0x1b },
> -	{ .mbps = 1300, .reg = 0x2b },
> -	{ .mbps = 1350, .reg = 0x3c },
> -	{ .mbps = 1400, .reg = 0x0c },
> -	{ .mbps = 1450, .reg = 0x1c },
> -	{ .mbps = 1500, .reg = 0x2c },
> +	{ .reg = 0x00, .max =   97 },
> +	{ .reg = 0x10, .max =  107 },
> +	{ .reg = 0x20, .max =  118 },
> +	{ .reg = 0x30, .max =  128 },
> +	{ .reg = 0x01, .max =  139 },
> +	{ .reg = 0x11, .max =  149 },
> +	{ .reg = 0x21, .max =  160 },
> +	{ .reg = 0x31, .max =  170 },
> +	{ .reg = 0x02, .max =  181 },
> +	{ .reg = 0x12, .max =  191 },
> +	{ .reg = 0x22, .max =  202 },
> +	{ .reg = 0x32, .max =  212 },
> +	{ .reg = 0x03, .max =  228 },
> +	{ .reg = 0x13, .max =  224 },
> +	{ .reg = 0x23, .max =  259 },
> +	{ .reg = 0x33, .max =  275 },
> +	{ .reg = 0x04, .max =  301 },
> +	{ .reg = 0x14, .max =  328 },
> +	{ .reg = 0x25, .max =  354 },
> +	{ .reg = 0x35, .max =  380 },
> +	{ .reg = 0x05, .max =  433 },
> +	{ .reg = 0x16, .max =  485 },
> +	{ .reg = 0x26, .max =  538 },
> +	{ .reg = 0x37, .max =  590 },
> +	{ .reg = 0x07, .max =  643 },
> +	{ .reg = 0x18, .max =  695 },
> +	{ .reg = 0x28, .max =  748 },
> +	{ .reg = 0x39, .max =  800 },
> +	{ .reg = 0x09, .max =  853 },
> +	{ .reg = 0x19, .max =  905 },
> +	{ .reg = 0x29, .max =  958 },
> +	{ .reg = 0x3a, .max = 1010 },
> +	{ .reg = 0x0a, .max = 1063 },
> +	{ .reg = 0x1a, .max = 1115 },
> +	{ .reg = 0x2a, .max = 1168 },
> +	{ .reg = 0x3b, .max = 1220 },
> +	{ .reg = 0x0b, .max = 1273 },
> +	{ .reg = 0x1b, .max = 1325 },
> +	{ .reg = 0x2b, .max = 1378 },
> +	{ .reg = 0x3c, .max = 1430 },
> +	{ .reg = 0x0c, .max = 1483 },
> +	{ .reg = 0x1c, .max = 1500 },
> +	{ .reg = 0x2c, .max = 1500 },
>  	{ /* sentinel */ },
>  };
>  
>  static const struct rcsi2_mbps_reg hsfreqrange_m3w_h3es1[] = {
> -	{ .mbps =   80,	.reg = 0x00 },
> -	{ .mbps =   90,	.reg = 0x10 },
> -	{ .mbps =  100,	.reg = 0x20 },
> -	{ .mbps =  110,	.reg = 0x30 },
> -	{ .mbps =  120,	.reg = 0x01 },
> -	{ .mbps =  130,	.reg = 0x11 },
> -	{ .mbps =  140,	.reg = 0x21 },
> -	{ .mbps =  150,	.reg = 0x31 },
> -	{ .mbps =  160,	.reg = 0x02 },
> -	{ .mbps =  170,	.reg = 0x12 },
> -	{ .mbps =  180,	.reg = 0x22 },
> -	{ .mbps =  190,	.reg = 0x32 },
> -	{ .mbps =  205,	.reg = 0x03 },
> -	{ .mbps =  220,	.reg = 0x13 },
> -	{ .mbps =  235,	.reg = 0x23 },
> -	{ .mbps =  250,	.reg = 0x33 },
> -	{ .mbps =  275,	.reg = 0x04 },
> -	{ .mbps =  300,	.reg = 0x14 },
> -	{ .mbps =  325,	.reg = 0x05 },
> -	{ .mbps =  350,	.reg = 0x15 },
> -	{ .mbps =  400,	.reg = 0x25 },
> -	{ .mbps =  450,	.reg = 0x06 },
> -	{ .mbps =  500,	.reg = 0x16 },
> -	{ .mbps =  550,	.reg = 0x07 },
> -	{ .mbps =  600,	.reg = 0x17 },
> -	{ .mbps =  650,	.reg = 0x08 },
> -	{ .mbps =  700,	.reg = 0x18 },
> -	{ .mbps =  750,	.reg = 0x09 },
> -	{ .mbps =  800,	.reg = 0x19 },
> -	{ .mbps =  850,	.reg = 0x29 },
> -	{ .mbps =  900,	.reg = 0x39 },
> -	{ .mbps =  950,	.reg = 0x0a },
> -	{ .mbps = 1000,	.reg = 0x1a },
> -	{ .mbps = 1050,	.reg = 0x2a },
> -	{ .mbps = 1100,	.reg = 0x3a },
> -	{ .mbps = 1150,	.reg = 0x0b },
> -	{ .mbps = 1200,	.reg = 0x1b },
> -	{ .mbps = 1250,	.reg = 0x2b },
> -	{ .mbps = 1300,	.reg = 0x3b },
> -	{ .mbps = 1350,	.reg = 0x0c },
> -	{ .mbps = 1400,	.reg = 0x1c },
> -	{ .mbps = 1450,	.reg = 0x2c },
> -	{ .mbps = 1500,	.reg = 0x3c },
> +	{ .reg = 0x00, .max =  110 },
> +	{ .reg = 0x10, .max =  120 },
> +	{ .reg = 0x20, .max =  131 },
> +	{ .reg = 0x30, .max =  141 },
> +	{ .reg = 0x01, .max =  152 },
> +	{ .reg = 0x11, .max =  162 },
> +	{ .reg = 0x21, .max =  173 },
> +	{ .reg = 0x31, .max =  183 },
> +	{ .reg = 0x02, .max =  194 },
> +	{ .reg = 0x12, .max =  204 },
> +	{ .reg = 0x22, .max =  215 },
> +	{ .reg = 0x32, .max =  225 },
> +	{ .reg = 0x03, .max =  241 },
> +	{ .reg = 0x13, .max =  257 },
> +	{ .reg = 0x23, .max =  273 },
> +	{ .reg = 0x33, .max =  275 },
> +	{ .reg = 0x04, .max =  301 },
> +	{ .reg = 0x14, .max =  328 },
> +	{ .reg = 0x05, .max =  354 },
> +	{ .reg = 0x15, .max =  393 },
> +	{ .reg = 0x25, .max =  446 },
> +	{ .reg = 0x06, .max =  498 },
> +	{ .reg = 0x16, .max =  551 },
> +	{ .reg = 0x07, .max =  603 },
> +	{ .reg = 0x17, .max =  656 },
> +	{ .reg = 0x08, .max =  708 },
> +	{ .reg = 0x18, .max =  761 },
> +	{ .reg = 0x09, .max =  813 },
> +	{ .reg = 0x19, .max =  866 },
> +	{ .reg = 0x29, .max =  918 },
> +	{ .reg = 0x39, .max =  971 },
> +	{ .reg = 0x0a, .max = 1023 },
> +	{ .reg = 0x1a, .max = 1076 },
> +	{ .reg = 0x2a, .max = 1128 },
> +	{ .reg = 0x3a, .max = 1181 },
> +	{ .reg = 0x0b, .max = 1233 },
> +	{ .reg = 0x1b, .max = 1286 },
> +	{ .reg = 0x2b, .max = 1338 },
> +	{ .reg = 0x3b, .max = 1391 },
> +	{ .reg = 0x0c, .max = 1443 },
> +	{ .reg = 0x1c, .max = 1496 },
> +	{ .reg = 0x2c, .max = 1500 },
> +	{ .reg = 0x3c, .max = 1500 },
>  	{ /* sentinel */ },
>  };
>  
> @@ -432,11 +432,11 @@ static int rcsi2_set_phypll(struct rcar_csi2 *priv, unsigned int mbps)
>  {
>  	const struct rcsi2_mbps_reg *hsfreq;
>  
> -	for (hsfreq = priv->info->hsfreqrange; hsfreq->mbps != 0; hsfreq++)
> -		if (hsfreq->mbps >= mbps)
> +	for (hsfreq = priv->info->hsfreqrange; hsfreq->max != 0; hsfreq++)
> +		if (hsfreq->max >= mbps)
>  			break;
>  
> -	if (!hsfreq->mbps) {
> +	if (!hsfreq->max) {
>  		dev_err(priv->dev, "Unsupported PHY speed (%u Mbps)", mbps);
>  		return -ERANGE;
>  	}
> @@ -907,11 +907,11 @@ static int rcsi2_phtw_write_mbps(struct rcar_csi2 *priv, unsigned int mbps,
>  {
>  	const struct rcsi2_mbps_reg *value;
>  
> -	for (value = values; value->mbps; value++)
> -		if (value->mbps >= mbps)
> +	for (value = values; value->max; value++)
> +		if (value->max >= mbps)
>  			break;
>  
> -	if (!value->mbps) {
> +	if (!value->max) {
>  		dev_err(priv->dev, "Unsupported PHY speed (%u Mbps)", mbps);
>  		return -ERANGE;
>  	}
> -- 
> 2.7.4
> 

-- 
Best Regards,
Michael



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux