Re: [PATCH v4 9/9] arm64: dts: renesas: salvator: add a connection from adv748x codec (HDMI input) to the R-Car SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert,

I'm sorry for late reply. Some unrelated happenings here in south Germany.

Geert Uytterhoeven, Mon, Mar 30, 2020 10:32:47 +0200:
> On Thu, Mar 26, 2020 at 11:55 AM Alex Riesen <alexander.riesen@xxxxxxxxxxx> wrote:
> > --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
> > @@ -510,6 +511,15 @@ adv7482_txb: endpoint {
> >                                 remote-endpoint = <&csi20_in>;
> >                         };
> >                 };
> > +
> > +               port@c {
> > +                       reg = <12>;
> > +
> > +                       adv7482_i2s: endpoint {
> > +                               remote-endpoint = <&rsnd_endpoint3>;
> > +                               system-clock-direction-out;
> > +                       };
> > +               };
> 
> As the adv748x driver just ignores "invalid" endpoints...
> 
> > @@ -758,8 +769,19 @@ &rcar_sound {
> >                  <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
> >                  <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
> >                  <&audio_clk_a>, <&cs2000>,
> > -                <&audio_clk_c>,
> > +                <&adv7482_hdmi_in>,
> >                  <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
> 
> ... and the rsnd driver ignores nonexistent-clocks, the DT change has no
> hard dependency on the driver change, and won't introduce regressions
> when included, right?

Well, it maybe won't, but isn't it a little ... implicit?
And I'm no haste to include the changes, if you mean I can (or should) submit
the device tree patch separately.

> > @@ -777,6 +799,21 @@ rsnd_endpoint0: endpoint {
> >                                 capture  = <&ssi1 &src1 &dvc1>;
> >                         };
> >                 };
> > +               rsnd_port3: port@3 {
> > +                       reg = <3>;
> > +                       rsnd_endpoint3: endpoint {
> > +                               remote-endpoint = <&adv7482_i2s>;
> > +
> > +                               dai-tdm-slot-num = <8>;
> > +                               dai-tdm-slot-width = <32>;
> > +                               dai-format = "left_j";
> > +                               mclk-fs = <256>;
> > +                               bitclock-master = <&adv7482_i2s>;
> > +                               frame-master = <&adv7482_i2s>;
> > +
> > +                               capture = <&ssi4>;
> > +                       };
> > +               };
> >         };
> >  };
> 
> However, as salvator-common.dtsi is shared by all Salvator-X(S) variants,
> you'll have to add a dummy ssi4 node to r8a77961.dtsi first.

I see. There are even two dummy SSI nodes already. I would prefer to submit
the change together with other Salvator device tree changes. Is that alright?

Regards,
Alex




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux