Re: [PATCH v2 07/10] dt-bindings: adv748x: add information about serial audio interface (I2S/TDM)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Alex,

On Fri, Mar 20, 2020 at 9:44 AM Alex Riesen
<alexander.riesen@xxxxxxxxxxx> wrote:
> Laurent Pinchart, Thu, Mar 19, 2020 19:01:25 +0100:
> > On Thu, Mar 19, 2020 at 06:42:36PM +0100, Alex Riesen wrote:
> > > As the driver has some support for the audio interface of the device,
> > > the bindings file should mention it.

> > > @@ -16,6 +18,8 @@ Required Properties:
> > >      slave device on the I2C bus. The main address is mandatory, others are
> > >      optional and remain at default values if not specified.
> > >
> > > +  - #clock-cells: must be <0> if the I2S port is used
> >
> > Wouldn't it be simpler to set it to 0 unconditionally ?
>
> Would it? If the port itself is optional, shouldn't the clock be an option
> too?

You'd be surprised how many board designers would consider this a cheap
12.288 MHz clock source, without using the I2S port ;-)

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux