Hi Yoshihiro-san,
Thank you for the review,
> -----Original Message-----
> From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> Sent: 17 March 2020 09:59
> To: Lad Prabhakar <prabhakar.csengg@xxxxxxxxx>
> Cc: Andrew Murray <andrew.murray@xxxxxxx>; linux-pci@xxxxxxxxxxxxxxx;
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-renesas-soc@xxxxxxxxxxxxxxx;
> linux-rockchip@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; Prabhakar Mahadev Lad <prabhakar.mahadev-
> lad.rj@xxxxxxxxxxxxxx>; Bjorn Helgaas <bhelgaas@xxxxxxxxxx>; Rob
> Herring <robh+dt@xxxxxxxxxx>; Mark Rutland <mark.rutland@xxxxxxx>;
> Catalin Marinas <catalin.marinas@xxxxxxx>; Will Deacon <will@xxxxxxxxxx>;
> Kishon Vijay Abraham I <kishon@xxxxxx>; Lorenzo Pieralisi
> <lorenzo.pieralisi@xxxxxxx>; Arnd Bergmann <arnd@xxxxxxxx>; Greg
> Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>; Jingoo Han
> <jingoohan1@xxxxxxxxx>; Gustavo Pimentel
> <gustavo.pimentel@xxxxxxxxxxxx>; Marek Vasut
> <marek.vasut+renesas@xxxxxxxxx>; Shawn Lin <shawn.lin@rock-
> chips.com>; Heiko Stuebner <heiko@xxxxxxxxx>
> Subject: RE: [PATCH v5 6/7] PCI: rcar: Add support for rcar PCIe controller in
> endpoint mode
>
> Hi Prabhakar-san,
>
> Thank you for the patch!
>
> > From: Lad Prabhakar, Sent: Saturday, February 29, 2020 12:41 AM
> >
> > This patch adds support for rcar PCIe controller to work in endpoint mode.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-
> lad.rj@xxxxxxxxxxxxxx>
> > ---
> > drivers/pci/controller/Kconfig | 8 +
> > drivers/pci/controller/Makefile | 1 +
> > drivers/pci/controller/pcie-rcar-ep.c | 490
> ++++++++++++++++++++++++++++++++++
> > drivers/pci/controller/pcie-rcar.h | 4 +
> > 4 files changed, 503 insertions(+)
> > create mode 100644 drivers/pci/controller/pcie-rcar-ep.c
> >
> > diff --git a/drivers/pci/controller/Kconfig
> > b/drivers/pci/controller/Kconfig index 37e0ea7..9bf4b02 100644
> > --- a/drivers/pci/controller/Kconfig
> > +++ b/drivers/pci/controller/Kconfig
> > @@ -62,6 +62,14 @@ config PCIE_RCAR_HOST
> > Say Y here if you want PCIe controller support on R-Car SoCs in host
> > mode.
> >
> > +config PCIE_RCAR_EP
> > +bool "Renesas R-Car PCIe endpoint controller"
> > +depends on ARCH_RENESAS || COMPILE_TEST
> > +depends on PCI_ENDPOINT
> > +help
> > + Say Y here if you want PCIe controller support on R-Car SoCs in
> > + endpoint mode.
> > +
> > config PCI_HOST_COMMON
> > bool
> > select PCI_ECAM
> > diff --git a/drivers/pci/controller/Makefile
> > b/drivers/pci/controller/Makefile index b4ada32..067bd33 100644
> > --- a/drivers/pci/controller/Makefile
> > +++ b/drivers/pci/controller/Makefile
> > @@ -8,6 +8,7 @@ obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
> > obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
> > obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
> > obj-$(CONFIG_PCIE_RCAR_HOST) += pcie-rcar.o pcie-rcar-host.o
> > +obj-$(CONFIG_PCIE_RCAR_EP) += pcie-rcar.o pcie-rcar-ep.o
> > obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-common.o
> > obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
> > obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o diff --git
> > a/drivers/pci/controller/pcie-rcar-ep.c
> > b/drivers/pci/controller/pcie-rcar-ep.c
> > new file mode 100644
> > index 0000000..db89bbe
> > --- /dev/null
> > +++ b/drivers/pci/controller/pcie-rcar-ep.c
> > @@ -0,0 +1,490 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * PCIe endpoint driver for Renesas R-Car SoCs
> > + * Copyright (c) 2020 Renesas Electronics Europe GmbH
> > + *
> > + * Author: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/of_address.h>
> > +#include <linux/of_irq.h>
> > +#include <linux/of_pci.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/pci.h>
> > +#include <linux/pci-epc.h>
> > +#include <linux/phy/phy.h>
> > +#include <linux/platform_device.h>
> > +
> > +#include "pcie-rcar.h"
> > +
> > +/* Structure representing the PCIe interface */ struct rcar_pcie {
> > +phys_addr_t*ob_addr;
>
> I think "ob_mapped_addr" is better.
>
OK will rename that.
> > +struct pci_epc_mem_window *ob_window;
>
> I think we can get these windows from "array of address space of the
> endpoint controller" in struct pci_epc. If so, we can remove this member.
>
I shall see if this can be dropped.
> > +struct pci_epc*epc;
>
> This member can be removed like pcie-cadence-ep.c because this is not used
> except saving the epc value from devm_pci_epc_create().
>
OK will drop it.
> <snip>
> > +static int rcar_pcie_ep_start(struct pci_epc *epc) {
> > +struct rcar_pcie *ep = epc_get_drvdata(epc);
> > +
> > +rcar_pci_write_reg(ep->base, CFINIT, PCIETCTLR);
>
> The following setting is needed before CFINIT like host.
>
> rcar_pci_write_reg(pcie->base, MACCTLR_INIT_VAL, MACCTLR);
>
I shall add this as part of rcar_pcie_ep_hw_init()
> > +
> > +return 0;
> > +}
> > +
> > +static void rcar_pcie_ep_stop(struct pci_epc *epc) {
> > +struct rcar_pcie *ep = epc_get_drvdata(epc);
> > +
> > +rcar_pci_write_reg(ep->base, 0, PCIETCTLR); }
> > +
> > +static const struct pci_epc_features rcar_pcie_epc_features = {
> > +.linkup_notifier = false,
> > +.msi_capable = false,
> > +.msix_capable = false,
> > +/* use 64-bit bars so mark bar1/3/5 as reserved */
> > +.reserved_bar = 1 << BAR_1 | 1 << BAR_3 | 1 << BAR_5,
> > +.bar_fixed_64bit = (1 << BAR_0) | (1 << BAR_2) | (1 << BAR_4),
>
> These parentheses are not needed like .reserved_bar.
>
Agreed.
> <snip>
> > +err = pci_epc_mem_init(epc, pcie->ob_window, pcie-
> >num_ob_windows);
> > +if (err < 0) {
> > +dev_err(dev, "failed to initialize the epc memory space\n");
> > +goto err_pm_put;
> > +}
> > +
> > +rcar_pcie_ep_hw_init(pcie);
>
> I'm not sure, but I wonder if we should call this hw init before
> pci_epc_mem_init().
>
Ideally shouldn't matter because in pci_epc_mem_init(), we just tell the framework
our windows properties. But shall move hw_init() before mem_init().
> <snip>
> > +builtin_platform_driver(rcar_pcie_ep_driver);
> > diff --git a/drivers/pci/controller/pcie-rcar.h
> > b/drivers/pci/controller/pcie-rcar.h
> > index b529d806..5564ca8 100644
> > --- a/drivers/pci/controller/pcie-rcar.h
> > +++ b/drivers/pci/controller/pcie-rcar.h
> > @@ -17,6 +17,7 @@
> > #define PCIECDR0x000020
> > #define PCIEMSR0x000028
> > #define PCIEINTXR0x000400
> > +#define ASTINTX_SHIFTBIT(16)
>
> Just "ASTINTX" is better.
>
Shall replace it.
> > #define PCIEPHYSR0x0007f0
> > #define PHYRDYBIT(0)
> > #define PCIEMSITXR0x000840
> > @@ -55,12 +56,15 @@
> >
> > /* Configuration */
> > #define PCICONF(x)(0x010000 + ((x) * 0x4))
> > +#define INTDIS_SHIFTBIT(10)
>
> Same here (we can remove "_SHIFT").
>
OK.
Cheers,
--Prabhakar
> Best regards,
> Yoshihiro Shimoda
>
> > #define PMCAP(x)(0x010040 + ((x) * 0x4))
> > #define EXPCAP(x)(0x010070 + ((x) * 0x4))
> > #define VCCAP(x)(0x010100 + ((x) * 0x4))
> >
> > /* link layer */
> > +#define IDSETR00x011000
> > #define IDSETR10x011004
> > +#define SUBIDSETR0x011024
> > #define TLCTLR0x011048
> > #define MACSR0x011054
> > #define SPCHGFINBIT(4)
> > --
> > 2.7.4
Renesas Electronics Europe GmbH, Geschaeftsfuehrer/President: Carsten Jauch, Sitz der Gesellschaft/Registered office: Duesseldorf, Arcadiastrasse 10, 40472 Duesseldorf, Germany, Handelsregister/Commercial Register: Duesseldorf, HRB 3708 USt-IDNr./Tax identification no.: DE 119353406 WEEE-Reg.-Nr./WEEE reg. no.: DE 14978647
