[PATCH 2/3] pwm: renesas-tpu: Fix late Runtime PM enablement

[Geert Uytterhoeven <geert+renesas@xxxxxxxxx>]

Runtime PM should be enabled before calling pwmchip_add(), as PWM users
can appear immediately after the PWM chip has been added.
Likewise, Runtime PM should always be disabled after the removal of the
PWM chip, even if the latter failed.

Fixes: 99b82abb0a35b073 ("pwm: Add Renesas TPU PWM driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
 drivers/pwm/pwm-renesas-tpu.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/pwm/pwm-renesas-tpu.c b/drivers/pwm/pwm-renesas-tpu.c
index 4a855a21b782dea3..8032acc84161a9dd 100644
--- a/drivers/pwm/pwm-renesas-tpu.c
+++ b/drivers/pwm/pwm-renesas-tpu.c
@@ -415,16 +415,17 @@ static int tpu_probe(struct platform_device *pdev)
 	tpu->chip.base = -1;
 	tpu->chip.npwm = TPU_CHANNEL_MAX;
 
+	pm_runtime_enable(&pdev->dev);
+
 	ret = pwmchip_add(&tpu->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to register PWM chip\n");
+		pm_runtime_disable(&pdev->dev);
 		return ret;
 	}
 
 	dev_info(&pdev->dev, "TPU PWM %d registered\n", tpu->pdev->id);
 
-	pm_runtime_enable(&pdev->dev);
-
 	return 0;
 }
 
@@ -434,12 +435,10 @@ static int tpu_remove(struct platform_device *pdev)
 	int ret;
 
 	ret = pwmchip_remove(&tpu->chip);
-	if (ret)
-		return ret;
 
 	pm_runtime_disable(&pdev->dev);
 
-	return 0;
+	return ret;
 }
 
 #ifdef CONFIG_OF
-- 
2.17.1