On Fri, 6 Mar 2020 09:50:38 +0100, Geert Uytterhoeven wrote:
> The descriptions for the spi-rx-bus-width and spi-tx-bus-width
> properties refer to "MISO" and "MOSI", which are not explained in the
> document. While these abbreviations are fairly common when talking
> about SPI, and thus may not need an explanation, they are not entirely
> correct in this context, as the SPI controller may be used in slave mode
> instead of master mode.
>
> Fix this by replacing them by "read transfers" resp. "write transfers",
> like is done for the spi-rx-delay-us and spi-tx-delay-us properties.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> ---
> v3:
> - No changes,
>
> v2:
> - New.
>
> This issue was present in the .txt version of the bindings, too, so
> technically it needs
> Fixes: a8830cb19cfea04e ("spi: Document DT bindings for SPI controllers in slave mode")
> but of course it won't apply to that version.
> ---
> Documentation/devicetree/bindings/spi/spi-controller.yaml | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
