Hi Marian,
On Tue, Mar 3, 2020 at 2:06 PM Marian-Cristian Rotariu
<marian-cristian.rotariu.rb@xxxxxxxxxxxxxx> wrote:
> On the Generic SODIMM Development Platform there is an RGB LCD panel
> directly connected to the DU output. It uses the TPU0 as backlight, one
> GPIO pull-up configuration for power enable, R[2:7], G[2:7], B[2:7],
> VSYNC, HSYNC, DU0_DISP and, DU0_CLK as inputs.
>
> There is no encoder between the DU and the panel, therefore the default
> connector driver is used.
>
> The two variants of the iW-G22D should be mutually exclusive, therefore
> this patch also disables the RGB LCD display when the HDMI extension board
> is used.
>
> Changes for v2:
> - fix the backlight of the panel
> - remove "simple-panel" compatible as it is not needed
> - use only one port for the endpoint connection of the panel
Thanks for the update!
> Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@xxxxxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
i.e. will queue in renesas-devel for v5.7.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
