[PATCH v4 3/4] clk: renesas: rcar-usb2-clock-sel: Add multiple clocks management

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This hardware needs to enable clocks of both host and peripheral.
So, this patch adds multiple clocks management.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
 drivers/clk/renesas/rcar-usb2-clock-sel.c | 27 +++++++++++++++++++++++++--
 1 file changed, 25 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/renesas/rcar-usb2-clock-sel.c b/drivers/clk/renesas/rcar-usb2-clock-sel.c
index b97f5f9..d5f47ab 100644
--- a/drivers/clk/renesas/rcar-usb2-clock-sel.c
+++ b/drivers/clk/renesas/rcar-usb2-clock-sel.c
@@ -26,9 +26,15 @@
 #define CLKSET0_PRIVATE		BIT(0)
 #define CLKSET0_EXTAL_ONLY	(CLKSET0_INTCLK_EN | CLKSET0_PRIVATE)
 
+static const struct clk_bulk_data rcar_usb2_clocks[] = {
+	{ .id = "ehci_ohci", },
+	{ .id = "hs-usb-if", },
+};
+
 struct usb2_clock_sel_priv {
 	void __iomem *base;
 	struct clk_hw hw;
+	struct clk_bulk_data clks[ARRAY_SIZE(rcar_usb2_clocks)];
 	bool extal;
 	bool xtal;
 };
@@ -53,14 +59,25 @@ static void usb2_clock_sel_disable_extal_only(struct usb2_clock_sel_priv *priv)
 
 static int usb2_clock_sel_enable(struct clk_hw *hw)
 {
-	usb2_clock_sel_enable_extal_only(to_priv(hw));
+	struct usb2_clock_sel_priv *priv = to_priv(hw);
+	int ret;
+
+	ret = clk_bulk_prepare_enable(ARRAY_SIZE(priv->clks), priv->clks);
+	if (ret)
+		return ret;
+
+	usb2_clock_sel_enable_extal_only(priv);
 
 	return 0;
 }
 
 static void usb2_clock_sel_disable(struct clk_hw *hw)
 {
-	usb2_clock_sel_disable_extal_only(to_priv(hw));
+	struct usb2_clock_sel_priv *priv = to_priv(hw);
+
+	usb2_clock_sel_disable_extal_only(priv);
+
+	clk_bulk_disable_unprepare(ARRAY_SIZE(priv->clks), priv->clks);
 }
 
 /*
@@ -119,6 +136,7 @@ static int rcar_usb2_clock_sel_probe(struct platform_device *pdev)
 	struct usb2_clock_sel_priv *priv;
 	struct clk *clk;
 	struct clk_init_data init;
+	int ret;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -128,6 +146,11 @@ static int rcar_usb2_clock_sel_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->base))
 		return PTR_ERR(priv->base);
 
+	memcpy(priv->clks, rcar_usb2_clocks, sizeof(priv->clks));
+	ret = devm_clk_bulk_get(dev, ARRAY_SIZE(priv->clks), priv->clks);
+	if (ret < 0)
+		return ret;
+
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
 
-- 
2.7.4




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux