Re: [RFC PATCH 6/7] i2c: of: mark a whole array of regs as reserved

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 20/02/20 18:24, Wolfram Sang wrote:
> Back then, 'reg' properties in I2C DT bindings only contained one
> address and this address was assigned a device and, thus, blocked.
> Meanwhile, chips using multiple addresses are common and the 'reg'
> property can be an array described by 'reg-names'. This code enhances
> I2C DT parsing, so it will reserve all addresses described in an array.
> They will be bound to the 'dummy' driver as 'reserved' iff the first
> address can be assigned successfully. If that is not the case, the array
> is not further considered. If one later address of the array can not be
> assigned, it will be reported but we don't bail out. The driver has to
> decide if that address is critical or not.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>

Reviewed-by: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>

-- 
Luca



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux