Add reset control properties to the device nodes for the Display Units
on all supported R-Car Gen2 SoCs. Note that on these SoCs, there is
only a single reset for all DU channels.
Join the clocks lines while at it, to increase uniformity.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
v2:
- New.
---
arch/arm/boot/dts/r8a7790.dtsi | 2 ++
arch/arm/boot/dts/r8a7791.dtsi | 5 +++--
arch/arm/boot/dts/r8a7792.dtsi | 5 +++--
arch/arm/boot/dts/r8a7793.dtsi | 5 +++--
arch/arm/boot/dts/r8a7794.dtsi | 2 ++
5 files changed, 13 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 334ba19769b998ac..e5ef9fd4284ae436 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1719,6 +1719,8 @@
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>;
clock-names = "du.0", "du.1", "du.2";
+ resets = <&cpg 724>;
+ reset-names = "du.0";
status = "disabled";
ports {
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index baedfab84cb09134..e38a5f01490d70a1 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1682,9 +1682,10 @@
reg = <0 0xfeb00000 0 0x40000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>;
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
clock-names = "du.0", "du.1";
+ resets = <&cpg 724>;
+ reset-names = "du.0";
status = "disabled";
ports {
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 39af16caa2aef501..4627eefa502b7677 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -852,9 +852,10 @@
reg = <0 0xfeb00000 0 0x40000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>;
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
clock-names = "du.0", "du.1";
+ resets = <&cpg 724>;
+ reset-names = "du.0";
status = "disabled";
ports {
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index eef035c4d98341b6..dadbda16161b7457 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -1341,9 +1341,10 @@
reg = <0 0xfeb00000 0 0x40000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>;
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
clock-names = "du.0", "du.1";
+ resets = <&cpg 724>;
+ reset-names = "du.0";
status = "disabled";
ports {
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 05ef79c6ed7f6b61..2c9e7a1ebfec1863 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -1356,6 +1356,8 @@
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
clock-names = "du.0", "du.1";
+ resets = <&cpg 724>;
+ reset-names = "du.0";
status = "disabled";
ports {
--
2.17.1
