Hello Renesas multimedia, this series provides an initial support for RDACM21 camera modules, which like the RDACM20 includes a MAX9271 serializer together with an OV490 ISP chip and an OV10640 imager. The series is based on the latest development from Kieran (gmsl/dev tag on Kieran's kernel.org remote). The series includes - 4 fixes to be applied on top of Kieran's branch. Almost all of them have been reported by the dt schema validator. - 05/11 which converts the proposed RDACM20 bindings to yaml - 06/11 which breaks out MAX9271 handling from RDACM20 driver - 07->09 which modified the max9286 driver to support remote communications with RDACM21 as well as RDACM20 - 10/11 which is an initial attempt to verify communication with RDACM21 by reading the ISP chip ID. At this stage, I augmented the RDACM20 driver to support both RDACM20 and 21. This defeats the purpose of 06/11 but I'm not sure which direction is better here, hence the RFC and the request for feedback. One driver per camera module, or a single driver with multiple compatibles? Please note that, as per RDACM20, the initial support for video capture operations will be limited to 1 resolution and one format, as the ISP+imager are configured by reading an on-chip EEPROM. - Finally, enable RDACM21 in the Eagle DTS to test the example. I'm very much interested in feedbacks on how to advance development for the RDACM21 module. Thanks j Jacopo Mondi (11): fixup! DNI: Debug fixup! arm64: dts: renesas: salvator-x: Add MAX9286 expansion board fixup! arm64: dts: renesas: eagle: Provide Eagle FAKRA dynamic overlay fixup! arm64: dts: renesas: eagle: Provide MAX9286 GMSL deserialiser fixup! dt-bindings: media: i2c: Add bindings for IMI RDACM20 media: i2c: Break out max9271 from rdacm20 driver media: i2c: max9286: Move notifiers operations media: i2c: max9286: Move link setup to completion media: i2c: max9286: Expand reverse chanenl amplitude WIP: media: i2c: rdacm20: Add RDACM21 support arm64: boot: dts: Eagle: Enable RDACM21 .../bindings/media/i2c/imi,rdacm20.txt | 66 --- .../bindings/media/i2c/imi,rdacm20.yaml | 116 +++++ arch/arm64/boot/dts/renesas/eagle-fakra.dtsi | 12 +- .../arm64/boot/dts/renesas/r8a77970-eagle.dts | 3 - .../boot/dts/renesas/salvator-x-max9286.dtsi | 16 +- drivers/media/i2c/Makefile | 3 +- drivers/media/i2c/max9271.c | 212 +++++++++ drivers/media/i2c/max9271.h | 84 ++++ drivers/media/i2c/max9286.c | 168 ++++--- drivers/media/i2c/rdacm20.c | 433 +++++++----------- 10 files changed, 693 insertions(+), 420 deletions(-) delete mode 100644 Documentation/devicetree/bindings/media/i2c/imi,rdacm20.txt create mode 100644 Documentation/devicetree/bindings/media/i2c/imi,rdacm20.yaml create mode 100644 drivers/media/i2c/max9271.c create mode 100644 drivers/media/i2c/max9271.h -- 2.24.0
