[PATCH 3/7] ARM: dts: renesas: Group tuples in pci ranges and dma-ranges properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



To improve human readability and enable automatic validation, the tuples
in the "ranges" and "dma-ranges" properties of PCI devices nodes should
be grouped.  Not doing so causes "make dtbs_check" to emit warnings
like:

    pcie@fe000000: dma-ranges: [[1107296256, 0, 1073741824, 0, 1073741824, 0, 2147483648, 1124073472, 2, 0, 2, 0, 1, 0]] is not valid under any of the given schemas (Possible causes of the failure):
    pcie@fe000000: dma-ranges: [[1107296256, 0, 1073741824, 0, 1073741824, 0, 2147483648, 1124073472, 2, 0, 2, 0, 1, 0]] is not of type 'boolean'
    pcie@fe000000: dma-ranges:0: [1107296256, 0, 1073741824, 0, 1073741824, 0, 2147483648, 1124073472, 2, 0, 2, 0, 1, 0] is too long

Fix this by grouping the tuples of the "ranges" and "dma-ranges"
properties using angle brackets.

Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
I still see e.g.:

    arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: soc: pci@ee090000:ranges: [[33554432, 0, 3993501696, 0, 3993501696, 0, 65536]] is not valid under any of the given schemas (Possible causes of the failure):
        arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: soc: pci@ee090000:ranges: True was expected
        arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: soc: pci@ee090000:ranges:0: [33554432, 0, 3993501696, 0, 3993501696, 0, 65536] is too long
---
 arch/arm/boot/dts/r8a7743.dtsi | 12 ++++++------
 arch/arm/boot/dts/r8a7744.dtsi | 12 ++++++------
 arch/arm/boot/dts/r8a7790.dtsi | 12 ++++++------
 arch/arm/boot/dts/r8a7791.dtsi | 12 ++++++------
 4 files changed, 24 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 36d45f5a6281bb89..1cd19a569bd0fb66 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -1617,13 +1617,13 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
-				      0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index 366201d0a71d1986..1c82dd0abd76c4c9 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -1603,13 +1603,13 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
-				      0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index ebe9dbf3f8884e99..334ba19769b998ac 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1617,13 +1617,13 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
-				      0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 2267607616e6413b..baedfab84cb09134 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1602,13 +1602,13 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
-				      0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.17.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux