RE: [PATCH/RFT 5/5] mmc: renesas_sdhi: use recent tap values for HS400

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Wolfram-san,

> From: Wolfram Sang, Sent: Wednesday, December 4, 2019 5:05 AM
> 
> New datasheets require different and new values for HS400 with 4taps or
> 8taps.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
> ---
> 
> This patch needs an ack from the BSP team and/or Shimoda-san. The BSP
> code uses this only for M3-W ES1.3 which is not supported yet upstream.
> However, H3 ES2.0 (which we do support) needs the same fix IMO because
> it is also using 4taps with HS400. But that needs confirmation as I
> can't recreate the error case here.

Thank you for the patch! I also couldn't reproduce the error case, but
I confirmed the register value was fixed on H3 ES2.0 (as 0x00000100)
and H3 ES3.0 (as 0x00000300).

So,

Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>

Best regards,
Yoshihiro Shimoda





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux