Hi Prabhakar,
On Wed, Nov 6, 2019 at 8:36 PM Lad Prabhakar <prabhakar.csengg@xxxxxxxxx> wrote:
> From: "Lad, Prabhakar" <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>
> This patch adds the bindings for the R-Car PCIe endpoint driver.
>
> Signed-off-by: Lad, Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Thanks for your patch!
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/rcar-pci-ep.txt
> @@ -0,0 +1,43 @@
> +* Renesas R-Car PCIe Endpoint Controller DT description
> +
> +Required properties:
> + "renesas,pcie-ep-r8a774c0" for the R8A774C0 SoC;
> + "renesas,pcie-ep-rcar-gen3" for a generic R-Car Gen3 or
> + RZ/G2 compatible device.
Unless I'm missing something, this is for the exact same hardware block as
Documentation/devicetree/bindings/pci/rcar-pci.txt?
So shouldn't you amend those bindings, instead of adding new compatible
values?
Please remember that DT describes hardware, not software policy.
So IMHO choosing between host and endpoint is purely a configuration
issue, and could be indicated by the presence or lack of some DT properties.
E.g. host mode requires both "bus-range" and "device_type" properties,
so their absence could indicate endpoint mode.
> +- reg: Five register ranges as listed in the reg-names property
> +- reg-names: Must include the following names
> + - "apb-base"
> + - "memory0"
> + - "memory1"
> + - "memory2"
> + - "memory3"
What is the purpose of the last 4 regions?
Can they be chosen by the driver, at runtime?
> +- resets: Must contain phandles to PCIe-related reset lines exposed by IP block
> +- clocks: from common clock binding: clock specifiers for the PCIe controller
> + clock.
> +- clock-names: from common clock binding: should be "pcie".
> +
> +Optional Property:
> +- max-functions: Maximum number of functions that can be configured (default 1).
> +
> +Example:
> +
> +SoC-specific DT Entry:
> +
> + pcie_ep: pcie_ep@fe000000 {
> + compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2";
These compatible values do not match with the ones above
(but they match with what I'd like to see ;-)
> + reg = <0 0xfe000000 0 0x80000>,
> + <0x0 0xfe100000 0 0x100000>,
> + <0x0 0xfe200000 0 0x200000>,
> + <0x0 0x30000000 0 0x8000000>,
> + <0x0 0x38000000 0 0x8000000>;
> + reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
> + clocks = <&cpg CPG_MOD 319>;
> + clock-names = "pcie";
> + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> + resets = <&cpg 319>;
> + };
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
