[PATCH] pinctrl: sh-pfc: Fix PINMUX_IPSR_PHYS() to set to GPSR

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch allows PINMUX_IPSR_PHYS() to set bits to GPSR.
When assigning function to pin, GPSR should be set peripheral function.
For example in using SCL3, GPSR2 bit7 (PWM1_A pin) should be set to
peripheral function.

Signed-off-by: Keiya Nobuta <nobuta.keiya@xxxxxxxxxxx>
---
 drivers/pinctrl/sh-pfc/sh_pfc.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/sh_pfc.h b/drivers/pinctrl/sh-pfc/sh_pfc.h
index 63d2089..12d15b6 100644
--- a/drivers/pinctrl/sh-pfc/sh_pfc.h
+++ b/drivers/pinctrl/sh-pfc/sh_pfc.h
@@ -423,12 +423,12 @@ extern const struct sh_pfc_soc_info shx3_pinmux_info;
 /*
  * Describe a pinmux configuration in which a pin is physically multiplexed
  * with other pins.
- *   - ipsr: IPSR field (unused, for documentation purposes only)
+ *   - ipsr: IPSR field
  *   - fn: Function name
  *   - psel: Physical multiplexing selector
  */
 #define PINMUX_IPSR_PHYS(ipsr, fn, psel) \
-	PINMUX_DATA(fn##_MARK, FN_##psel)
+	PINMUX_DATA(fn##_MARK, FN_##psel, FN_##ipsr)
 
 /*
  * Describe a pinmux configuration for a single-function pin with GPIO
-- 
2.7.4




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux