[PATCH v3 9/9] arm64: dts: renesas: Add support for Advantech idk-1110wr LVDS panel

[Biju Das <biju.das@xxxxxxxxxxxxxx>]

This patch adds support for Advantech idk-1110wr LVDS panel.
The HiHope RZ/G2[MN] is advertised as compatible with panel
idk-1110wr from Advantech, however the panel isn't sold alongside
the board.

Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
 V1-->V2
   * Incorporated Laurent's review comments
 V2-->V3
   * Incorporated Laurent's review comments
---
 .../renesas/rzg2-advantech-idk-1110wr-panel.dtsi   | 41 ++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi

diff --git a/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi b/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi
new file mode 100644
index 0000000..bcc2117
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Advantech idk-1110wr LVDS panel connected
+ * to RZ/G2 boards
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/ {
+	panel-lvds {
+		compatible = "advantech,idk-1110wr", "panel-lvds";
+
+		width-mm = <223>;
+		height-mm = <125>;
+
+		data-mapping = "jeida-24";
+
+		panel-timing {
+			/* 1024x600 @60Hz */
+			clock-frequency = <51200000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hsync-len = <240>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			vfront-porch = <15>;
+			vback-porch = <10>;
+			vsync-len = <10>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_connector>;
+			};
+		};
+	};
+};
+
+&lvds_connector {
+	remote-endpoint = <&panel_in>;
+};
-- 
2.7.4