Convert Renesas R-Car Thermal bindings documentation to json-schema.
Also name bindings documentation file according to the compat string
being documented.
As a side effect of this change all currently supported/used compat
strings are listed while no while card compat string is documented.
This, in my opinion, is desirable as only supported hardware should
be documented.
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
Based on v5.3-rc1
Tested using:
ARCH=arm make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/thermal/renesas,rcar-thermal.yaml
---
.../devicetree/bindings/thermal/rcar-thermal.txt | 78 ---------------
.../bindings/thermal/renesas,rcar-thermal.yaml | 110 +++++++++++++++++++++
2 files changed, 110 insertions(+), 78 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/thermal/rcar-thermal.txt
create mode 100644 Documentation/devicetree/bindings/thermal/renesas,rcar-thermal.yaml
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
deleted file mode 100644
index 196112d23b1e..000000000000
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-* Renesas R-Car Thermal
-
-Required properties:
-- compatible : "renesas,thermal-<soctype>",
- "renesas,rcar-gen2-thermal" (with thermal-zone) or
- "renesas,rcar-thermal" (without thermal-zone) as
- fallback except R-Car V3M/E3/D3 and RZ/G2E.
- Examples with soctypes are:
- - "renesas,thermal-r8a73a4" (R-Mobile APE6)
- - "renesas,thermal-r8a7743" (RZ/G1M)
- - "renesas,thermal-r8a7744" (RZ/G1N)
- - "renesas,thermal-r8a774c0" (RZ/G2E)
- - "renesas,thermal-r8a7779" (R-Car H1)
- - "renesas,thermal-r8a7790" (R-Car H2)
- - "renesas,thermal-r8a7791" (R-Car M2-W)
- - "renesas,thermal-r8a7792" (R-Car V2H)
- - "renesas,thermal-r8a7793" (R-Car M2-N)
- - "renesas,thermal-r8a77970" (R-Car V3M)
- - "renesas,thermal-r8a77990" (R-Car E3)
- - "renesas,thermal-r8a77995" (R-Car D3)
-- reg : Address range of the thermal registers.
- The 1st reg will be recognized as common register
- if it has "interrupts".
-
-Option properties:
-
-- interrupts : If present should contain 3 interrupts for
- R-Car V3M/E3/D3 and RZ/G2E or 1 interrupt otherwise.
-
-Example (non interrupt support):
-
-thermal@ffc48000 {
- compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
- reg = <0xffc48000 0x38>;
-};
-
-Example (interrupt support):
-
-thermal@e61f0000 {
- compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
- reg = <0xe61f0000 0x14
- 0xe61f0100 0x38
- 0xe61f0200 0x38
- 0xe61f0300 0x38>;
- interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-Example (with thermal-zone):
-
-thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <1000>;
- polling-delay = <5000>;
-
- thermal-sensors = <&thermal>;
-
- trips {
- cpu-crit {
- temperature = <115000>;
- hysteresis = <0>;
- type = "critical";
- };
- };
- cooling-maps {
- };
- };
-};
-
-thermal: thermal@e61f0000 {
- compatible = "renesas,thermal-r8a7790",
- "renesas,rcar-gen2-thermal",
- "renesas,rcar-thermal";
- reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
- interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
- power-domains = <&cpg_clocks>;
- #thermal-sensor-cells = <0>;
-};
diff --git a/Documentation/devicetree/bindings/thermal/renesas,rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/renesas,rcar-thermal.yaml
new file mode 100644
index 000000000000..ab4cc3c35410
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/renesas,rcar-thermal.yaml
@@ -0,0 +1,110 @@
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/renesas,rcar-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Thermal
+
+maintainers:
+ - Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
+ - Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,thermal-r8a73a4 # R-Mobile APE6
+ - renesas,thermal-r8a7743 # RZ/G1M
+ - renesas,thermal-r8a7744 # RZ/G1N
+ - renesas,thermal-r8a7779 # R-Car H1
+ - renesas,thermal-r8a774c0 # RZ/G2E
+ - renesas,thermal-r8a77970 # R-Car V3M
+ - renesas,thermal-r8a77990 # R-Car E3
+ - renesas,thermal-r8a77995 # R-Car D3
+ - const: renesas,rcar-thermal # Without thermal-zone
+
+ - items:
+ - enum:
+ - renesas,thermal-r8a7790 # R-Car H2
+ - renesas,thermal-r8a7791 # R-Car M2-W
+ - renesas,thermal-r8a7792 # R-Car V2H
+ - renesas,thermal-r8a7793 # R-Car M2-N
+ - const: renesas,rcar-gen2-thermal # With thermal-zone
+ - const: renesas,rcar-thermal # Without thermal-zone
+
+ reg:
+ # Address range of the thermal registers.
+ # The 1st reg will be recognized as common register if it has "interrupts".
+ minItems: 1
+
+ interrupts:
+ # If present should contain 3 interrupts for R-Car V3M/E3/D3 and RZ/G2E,
+ # otherwise 1 interrupt.
+ minItems: 1
+ maxItems: 3
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+examples :
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/r8a7790-clock.h>
+
+ # Example (non interrupt support):
+ - |
+ thermal@ffc48000 {
+ compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
+ reg = <0xffc48000 0x38>;
+ };
+
+ # Example (interrupt support):
+ - |
+ thermal@e61f0000 {
+ compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
+ reg = <0xe61f0000 0x14
+ 0xe61f0100 0x38
+ 0xe61f0200 0x38
+ 0xe61f0300 0x38>;
+ interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ # Example (with thermal-zone):
+ - |
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+
+ thermal-sensors = <&thermal>;
+
+ trips {
+ cpu-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ };
+ };
+ };
+
+ thermal: thermal@e61f0000 {
+ compatible = "renesas,thermal-r8a7790",
+ "renesas,rcar-gen2-thermal",
+ "renesas,rcar-thermal";
+ reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+ interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
+ power-domains = <&cpg_clocks>;
+ #thermal-sensor-cells = <0>;
+ };
--
2.11.0
