[PATCH] dt-bindings: hspi: Convert bindings to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Convert Renesas HSPI bindings documentation to json-schema.
Also name bindings documentation file according to the compat string
being documented.

As a side effect of this change all currently supported/used compat
strings are listed while no while card compat string is documented.
This, in my opinion, is desirable as only supported hardware should
be documented.

Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
Based on v5.3-rc1
Tested using:
  make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/renesas,hspi.yaml
---
 .../devicetree/bindings/spi/renesas,hspi.yaml      | 54 ++++++++++++++++++++++
 Documentation/devicetree/bindings/spi/sh-hspi.txt  | 26 -----------
 2 files changed, 54 insertions(+), 26 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/spi/renesas,hspi.yaml
 delete mode 100644 Documentation/devicetree/bindings/spi/sh-hspi.txt

diff --git a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
new file mode 100644
index 000000000000..94a64a33daf4
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/renesas,hspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas HSPI
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - renesas,hspi-r8a7778 # R-Car M1A
+        - renesas,hspi-r8a7779 # R-Car H1
+      - const: renesas,hspi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  # Pinctrl properties might be needed, too.
+  # See Documentation/devicetree/bindings/pinctrl/renesas,*.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#address-cells'
+  - '#size-cells'
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    hspi0: spi@fffc7000 {
+        compatible = "renesas,hspi-r8a7778", "renesas,hspi";
+        reg = <0xfffc7000 0x18>;
+        interrupt-parent = <&gic>;
+        interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
+
diff --git a/Documentation/devicetree/bindings/spi/sh-hspi.txt b/Documentation/devicetree/bindings/spi/sh-hspi.txt
deleted file mode 100644
index b9d1e4d11a77..000000000000
--- a/Documentation/devicetree/bindings/spi/sh-hspi.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Renesas HSPI.
-
-Required properties:
-- compatible       : "renesas,hspi-<soctype>", "renesas,hspi" as fallback.
-		     Examples with soctypes are:
-		       - "renesas,hspi-r8a7778" (R-Car M1)
-		       - "renesas,hspi-r8a7779" (R-Car H1)
-- reg              : Offset and length of the register set for the device
-- interrupts       : Interrupt specifier
-- #address-cells   : Must be <1>
-- #size-cells      : Must be <0>
-
-Pinctrl properties might be needed, too.  See
-Documentation/devicetree/bindings/pinctrl/renesas,*.
-
-Example:
-
-	hspi0: spi@fffc7000 {
-		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
-		reg = <0xfffc7000 0x18>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-- 
2.11.0




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux