From: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
Since the $idx variable value is stored across multiple calls to
rcar_pcie_inbound_ranges() function, and the $idx value is used to
index registers which are written, subsequent calls might cause
the $idx value to be high enough to trigger writes into nonexistent
registers.
Fix this by moving the $idx value check to the beginning of the loop.
Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
To: linux-pci@xxxxxxxxxxxxxxx
---
V2: New patch
V3: Adjust the check to idx >= MAX_NR_INBOUND_MAPS - 1
---
drivers/pci/controller/pcie-rcar.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c
index f6a669a9af41..56a6433eb70b 100644
--- a/drivers/pci/controller/pcie-rcar.c
+++ b/drivers/pci/controller/pcie-rcar.c
@@ -1048,6 +1048,10 @@ static int rcar_pcie_inbound_ranges(struct rcar_pcie *pcie,
mask &= ~0xf;
while (cpu_addr < cpu_end) {
+ if (idx >= MAX_NR_INBOUND_MAPS - 1) {
+ dev_err(pcie->dev, "Failed to map inbound regions!\n");
+ return -EINVAL;
+ }
/*
* Set up 64-bit inbound regions as the range parser doesn't
* distinguish between 32 and 64-bit types.
@@ -1067,11 +1071,6 @@ static int rcar_pcie_inbound_ranges(struct rcar_pcie *pcie,
pci_addr += size;
cpu_addr += size;
idx += 2;
-
- if (idx > MAX_NR_INBOUND_MAPS) {
- dev_err(pcie->dev, "Failed to map inbound regions!\n");
- return -EINVAL;
- }
}
*index = idx;
--
2.20.1
