[PATCH v2 0/3] pinctrl: sh-pfc: Rollback to mux if requires when the gpio is freed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch series is based on renesas-drivers.git /
renesas-drivers-2019-07-30-v5.3-rc2 tag.

About R-Car PWM driver modification, it seems to need more time to achieve
output duty zero about suitable gpio vs pinctrl handling. But, I believe
this pinctrl patches could be applied into the mainline regardless
the R-Car PWM modification.

Changes from v1:
 - Spin-off the pinctrl patches (from 1/7 to 3/7).
 - Add Geert-san's Reviewed-by on 1/3 and 2/3.
 - Add Fixes tag on 2/3.
https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=143129

Yoshihiro Shimoda (3):
  pinctrl: sh-pfc: add new flags into struct sh_pfc_pin_config
  pinctrl: sh-pfc: remove incomplete flag "cfg->type"
  pinctrl: sh-pfc: Rollback to mux if requires when the gpio is freed

 drivers/pinctrl/sh-pfc/pinctrl.c | 45 ++++++++++++++++++++--------------------
 1 file changed, 23 insertions(+), 22 deletions(-)

-- 
2.7.4




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux