[PATCH 1/2] PCI: rcar: Do not abort on too many inbound dma-ranges

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>

In case the "dma-ranges" DT property contains either too many ranges
or the range start address is unaligned in such a way that populating
the range into the controller requires multiple entries, a situation
may occur where all ranges cannot be loaded into the controller.

Currently, the driver refuses to probe in such a situation. Relax this
behavior, load as many ranges as possible and warn if some ranges do
not fit anymore.

Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
To: linux-pci@xxxxxxxxxxxxxxx
---
 drivers/pci/controller/pcie-rcar.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c
index f6a669a9af41..938adff4148f 100644
--- a/drivers/pci/controller/pcie-rcar.c
+++ b/drivers/pci/controller/pcie-rcar.c
@@ -1069,8 +1069,9 @@ static int rcar_pcie_inbound_ranges(struct rcar_pcie *pcie,
 		idx += 2;
 
 		if (idx > MAX_NR_INBOUND_MAPS) {
-			dev_err(pcie->dev, "Failed to map inbound regions!\n");
-			return -EINVAL;
+			dev_warn(pcie->dev,
+				 "Too many inbound regions, not all are mapped.\n");
+			break;
 		}
 	}
 	*index = idx;
-- 
2.20.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux