From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
This patch adds LEDs support to the HiHope RZ/G2[MN] Main Board
common device tree.
Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
Reviewed-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/renesas/hihope-common.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index 6a45c49c24dc..625c3aaead14 100644
--- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -17,6 +17,30 @@
stdout-path = "serial0:115200n8";
};
+ leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
+ label = "LED0";
+ };
+
+ led1 {
+ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ label = "LED1";
+ };
+
+ led2 {
+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ label = "LED2";
+ };
+
+ led3 {
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ label = "LED3";
+ };
+ };
+
reg_1p8v: regulator0 {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
--
2.11.0
