RE: [PATCH 3/3] arm64: dts: renesas: hihope-common: Add HDMI support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Simon,

Thank you for your feedback!

> From: Simon Horman <horms@xxxxxxxxxxxx>
> Sent: 19 June 2019 15:07
> Subject: Re: [PATCH 3/3] arm64: dts: renesas: hihope-common: Add HDMI support
> 
> On Wed, Jun 19, 2019 at 12:48:17PM +0000, Fabrizio Castro wrote:
> > Hi Laurent,
> >
> > > From: linux-renesas-soc-owner@xxxxxxxxxxxxxxx <linux-renesas-soc-owner@xxxxxxxxxxxxxxx> On Behalf Of Laurent Pinchart
> > > Sent: 19 June 2019 13:42
> > > Subject: Re: [PATCH 3/3] arm64: dts: renesas: hihope-common: Add HDMI support
> > >
> > > Hi Fabrizio,
> > >
> > > Thank you for the patch.
> > >
> > > On Tue, Jun 18, 2019 at 04:18:39PM +0100, Fabrizio Castro wrote:
> > > > Add HDMI support to the HiHope RZ/G2[MN] mother board common
> > > > dtsi.
> > > >
> > > > Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
> > > >
> > > > ---
> > > > Please note that this patch was tested with a 4K monitor and cma=96M
> > > >
> > > >  arch/arm64/boot/dts/renesas/hihope-common.dtsi | 62 ++++++++++++++++++++++++++
> > > >  1 file changed, 62 insertions(+)
> > > >
> > > > diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
> > > > index 625c3aa..e7568e1 100644
> > > > --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
> > > > +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
> > > > @@ -17,6 +17,18 @@
> > > >  		stdout-path = "serial0:115200n8";
> > > >  	};
> > > >
> > > > +	hdmi0-out {
> > > > +		compatible = "hdmi-connector";
> > > > +		label = "HDMI0 OUT";
> > >
> > > Is the label physically present on the device (printed on the board or
> > > the case) ?
> >
> > I am afraid it's not. Shall I send a v2? Or perhaps Simon could take it out while applying?
> 
> Thanks,
> 
> I have removed the label attribute when queuing this patch up for v5.3.
> The result is as follows:

Great, thank you Simon!

Fab

> 
> From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
> Date: Tue, 18 Jun 2019 16:18:39 +0100
> Subject: [PATCH] arm64: dts: renesas: hihope-common: Add HDMI support
> 
> Add HDMI support to the HiHope RZ/G2[MN] mother board common
> dtsi.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
> Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/renesas/hihope-common.dtsi | 61 ++++++++++++++++++++++++++
>  1 file changed, 61 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
> index 625c3aaead14..9f05e80cee10 100644
> --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
> +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
> @@ -17,6 +17,17 @@
>  		stdout-path = "serial0:115200n8";
>  	};
> 
> +	hdmi0-out {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi0_con: endpoint {
> +				remote-endpoint = <&rcar_dw_hdmi0_out>;
> +			};
> +		};
> +	};
> +
>  	leds {
>  		compatible = "gpio-leds";
> 
> @@ -82,6 +93,30 @@
>  		states = <3300000 1
>  			  1800000 0>;
>  	};
> +
> +	x302_clk: x302-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <33000000>;
> +	};
> +
> +	x304_clk: x304-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <25000000>;
> +	};
> +};
> +
> +&du {
> +	clocks = <&cpg CPG_MOD 724>,
> +		 <&cpg CPG_MOD 723>,
> +		 <&cpg CPG_MOD 722>,
> +		 <&versaclock5 1>,
> +		 <&x302_clk>,
> +		 <&versaclock5 2>;
> +	clock-names = "du.0", "du.1", "du.2",
> +		      "dclkin.0", "dclkin.1", "dclkin.2";
> +	status = "okay";
>  };
> 
>  &ehci0 {
> @@ -109,11 +144,37 @@
>  	};
>  };
> 
> +&hdmi0 {
> +	status = "okay";
> +
> +	ports {
> +		port@1 {
> +			reg = <1>;
> +			rcar_dw_hdmi0_out: endpoint {
> +				remote-endpoint = <&hdmi0_con>;
> +			};
> +		};
> +	};
> +};
> +
>  &hsusb {
>  	dr_mode = "otg";
>  	status = "okay";
>  };
> 
> +&i2c4 {
> +	clock-frequency = <400000>;
> +	status = "okay";
> +
> +	versaclock5: clock-generator@6a {
> +		compatible = "idt,5p49v5923";
> +		reg = <0x6a>;
> +		#clock-cells = <1>;
> +		clocks = <&x304_clk>;
> +		clock-names = "xin";
> +	};
> +};
> +
>  &ohci0 {
>  	status = "okay";
>  };
> --
> 2.11.0





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux