Hello Laurent, Thank you for your feedback. > From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > Sent: 19 June 2019 13:39 > Subject: Re: [PATCH 2/3] arm64: dts: renesas: r8a774a1: Add HDMI encoder instance > > Hi Fabrizio, > > Thank you for the patch. > > On Tue, Jun 18, 2019 at 04:18:38PM +0100, Fabrizio Castro wrote: > > Add the HDMI encoder to the R8A774A1 DT in disabled state. > > > > Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx> > > > > --- > > This patch depends on: > > https://patchwork.kernel.org/patch/10995149/ > > Is that the correct one ? I don't see how CAN support is related. It's only to please git ;-) Thank you for reviewing this. Fab > > In any case, > > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > > > arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 32 +++++++++++++++++++++++++++++++ > > 1 file changed, 32 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi > > index d6dd4b6..a849ca7 100644 > > --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi > > +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi > > @@ -2397,6 +2397,37 @@ > > }; > > }; > > > > + hdmi0: hdmi@fead0000 { > > + compatible = "renesas,r8a774a1-hdmi", > > + "renesas,rcar-gen3-hdmi"; > > + reg = <0 0xfead0000 0 0x10000>; > > + interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&cpg CPG_MOD 729>, > > + <&cpg CPG_CORE R8A774A1_CLK_HDMI>; > > + clock-names = "iahb", "isfr"; > > + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; > > + resets = <&cpg 729>; > > + status = "disabled"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + port@0 { > > + reg = <0>; > > + dw_hdmi0_in: endpoint { > > + remote-endpoint = <&du_out_hdmi0>; > > + }; > > + }; > > + port@1 { > > + reg = <1>; > > + }; > > + port@2 { > > + /* HDMI sound */ > > + reg = <2>; > > + }; > > + }; > > + }; > > + > > du: display@feb00000 { > > compatible = "renesas,du-r8a774a1"; > > reg = <0 0xfeb00000 0 0x70000>; > > @@ -2423,6 +2454,7 @@ > > port@1 { > > reg = <1>; > > du_out_hdmi0: endpoint { > > + remote-endpoint = <&dw_hdmi0_in>; > > }; > > }; > > port@2 { > > -- > Regards, > > Laurent Pinchart
