Re: [PATCH] arm64: dts: renesas: hihope-common: Add uSD and eMMC

[Simon Horman <horms@xxxxxxxxxxxx>]

On Wed, Jun 12, 2019 at 10:27:56AM +0200, Geert Uytterhoeven wrote:
> Hi Fabrizio,
> 
> On Fri, Jun 7, 2019 at 10:14 AM Fabrizio Castro
> <fabrizio.castro@xxxxxxxxxxxxxx> wrote:
> > This patch adds uSD and eMMC support to the HiHope RZ/G2M
> > board.
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
> 
> Thanks for your patch!
> 
> > --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
> 
> > +&sdhi3 {
> > +       pinctrl-0 = <&sdhi3_pins>;
> > +       pinctrl-1 = <&sdhi3_pins>;
> > +       pinctrl-names = "default", "state_uhs";
> > +
> > +       vmmc-supply = <&reg_3p3v>;
> > +       vqmmc-supply = <&reg_1p8v>;
> > +       bus-width = <8>;
> > +       mmc-hs200-1_8v;
> 
> Does the eMMC support HS400, too?
> 
> > +       non-removable;
> > +       fixed-emmc-driver-type = <1>;
> > +       status = "okay";
> > +};
> 
> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>

Thanks,

applied for inclusion in v5.3.