[PATCH] phy: renesas: rcar-gen3-usb2: fix imbalance powered flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The powered flag should be set for any other phys anyway. Otherwise,
after we have revised the device tree for the usb phy, the following
warning happened during a second system suspend. So, this patch fixes
the issue.

[   56.026531] unbalanced disables for USB20_VBUS0
[   56.031108] WARNING: CPU: 3 PID: 513 at drivers/regulator/core.c:2593 _regula
tor_disable+0xe0/0x1c0
[   56.040146] Modules linked in: rcar_du_drm rcar_lvds drm_kms_helper drm drm_p
anel_orientation_quirks vsp1 videobuf2_vmalloc videobuf2_dma_contig videobuf2_me
mops videobuf2_v4l2 videobuf2_common videodev snd_soc_rcar renesas_usbhs snd_soc
_audio_graph_card media snd_soc_simple_card_utils crct10dif_ce renesas_usb3 snd_
soc_ak4613 rcar_fcp pwm_rcar usb_dmac phy_rcar_gen3_usb3 pwm_bl ipv6
[   56.074047] CPU: 3 PID: 513 Comm: kworker/u16:19 Not tainted 5.2.0-rc3-00001-
g5f20a19 #6
[   56.082129] Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (
DT)
[   56.089524] Workqueue: events_unbound async_run_entry_fn
[   56.094832] pstate: 40000005 (nZcv daif -PAN -UAO)
[   56.099617] pc : _regulator_disable+0xe0/0x1c0
[   56.104054] lr : _regulator_disable+0xe0/0x1c0
[   56.108489] sp : ffff0000121c3ae0
[   56.111796] x29: ffff0000121c3ae0 x28: 0000000000000000
[   56.117102] x27: 0000000000000000 x26: ffff000010fe0e60
[   56.122407] x25: 0000000000000002 x24: 0000000000000001
[   56.127712] x23: 0000000000000002 x22: ffff8006f99d4000
[   56.133017] x21: ffff8006f99cc000 x20: ffff8006f9846800
[   56.138322] x19: ffff8006f9846800 x18: ffffffffffffffff
[   56.143626] x17: 0000000000000000 x16: 0000000000000000
[   56.148931] x15: ffff0000112f96c8 x14: ffff0000921c37f7
[   56.154235] x13: ffff0000121c3805 x12: ffff000011312000
[   56.159540] x11: 0000000005f5e0ff x10: ffff0000112f9f20
[   56.164844] x9 : ffff0000112d3018 x8 : 00000000000001ad
[   56.170149] x7 : 00000000ffffffcc x6 : ffff8006ff768180
[   56.175453] x5 : ffff8006ff768180 x4 : 0000000000000000
[   56.180758] x3 : ffff8006ff76ef10 x2 : ffff8006ff768180
[   56.186062] x1 : 3d2eccbaead8fb00 x0 : 0000000000000000
[   56.191367] Call trace:
[   56.193808]  _regulator_disable+0xe0/0x1c0
[   56.197899]  regulator_disable+0x40/0x78
[   56.201820]  rcar_gen3_phy_usb2_power_off+0x3c/0x50
[   56.206692]  phy_power_off+0x48/0xd8
[   56.210263]  usb_phy_roothub_power_off+0x30/0x50
[   56.214873]  usb_phy_roothub_suspend+0x1c/0x50
[   56.219311]  hcd_bus_suspend+0x13c/0x168
[   56.223226]  generic_suspend+0x4c/0x58
[   56.226969]  usb_suspend_both+0x1ac/0x238
[   56.230972]  usb_suspend+0xcc/0x170
[   56.234455]  usb_dev_suspend+0x10/0x18
[   56.238199]  dpm_run_callback.isra.6+0x20/0x68
[   56.242635]  __device_suspend+0x110/0x308
[   56.246637]  async_suspend+0x24/0xa8
[   56.250205]  async_run_entry_fn+0x40/0xf8
[   56.254210]  process_one_work+0x1e0/0x320
[   56.258211]  worker_thread+0x40/0x450
[   56.261867]  kthread+0x124/0x128
[   56.265094]  ret_from_fork+0x10/0x18
[   56.268661] ---[ end trace 86d7ec5de5c517af ]---
[   56.273290] phy phy-ee080200.usb-phy.10: phy poweroff failed --> -5

Reported-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Fixes: 549b6b55b005 ("phy: renesas: rcar-gen3-usb2: enable/disable independent irqs")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
 drivers/phy/renesas/phy-rcar-gen3-usb2.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index 1322185..dd2d7290 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -437,15 +437,15 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p)
 	struct rcar_gen3_chan *channel = rphy->ch;
 	void __iomem *usb2_base = channel->base;
 	u32 val;
-	int ret;
+	int ret = 0;
 
 	if (!rcar_gen3_are_all_rphys_power_off(channel))
-		return 0;
+		goto out;
 
 	if (channel->vbus) {
 		ret = regulator_enable(channel->vbus);
 		if (ret)
-			return ret;
+			goto out;
 	}
 
 	val = readl(usb2_base + USB2_USBCTR);
@@ -454,6 +454,8 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p)
 	val &= ~USB2_USBCTR_PLL_RST;
 	writel(val, usb2_base + USB2_USBCTR);
 
+out:
+	/* The powered flag should be set for any other phys anyway */
 	rphy->powered = true;
 
 	return 0;
-- 
2.7.4




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux