Update the DT bindings documentation to support usb role switch
for USB Type-C connector using USB role switch class framework.
Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
---
V6-->V7
* Incorporated shimoda-san's review comments.
(https://patchwork.kernel.org/patch/10944631/)
V5-->V6
* Updated description
* Added usb-role-switch-property
V4-->V5
* No Change
V3-->V4
* No Change
V2-->V3
* Added optional renesas,usb-role-switch property.
V1-->V2
* Added usb-role-switch-property
* Updated the example with usb-role-switch property.
---
.../devicetree/bindings/usb/renesas_usb3.txt | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
index 35039e7..5eecfbc 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
@@ -22,6 +22,12 @@ Required properties:
Optional properties:
- phys: phandle + phy specifier pair
- phy-names: must be "usb"
+ - usb-role-switch: support role switch. see usb/generic.txt
+
+Sub-nodes:
+- any connector to the data bus of this controller should be modelled using the
+ OF graph bindings specified in bindings/graph.txt, if the "usb-role-switch"
+ property is used.
Example of R-Car H3 ES1.x:
usb3_peri0: usb@ee020000 {
@@ -39,3 +45,20 @@ Example of R-Car H3 ES1.x:
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 327>;
};
+
+Example of RZ/G2E:
+ usb3_peri0: usb@ee020000 {
+ compatible = "renesas,r8a774c0-usb3-peri",
+ "renesas,rcar-gen3-usb3-peri";
+ reg = <0 0xee020000 0 0x400>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 328>;
+ companion = <&xhci0>;
+ usb-role-switch;
+
+ port {
+ usb3_role_switch: endpoint {
+ remote-endpoint = <&hd3ss3220_ep>;
+ };
+ };
+ };
--
2.7.4
